Installation, Specifications | Behringer BA810 specs

ULTRABASS BA810

4. INSTALLATION

4.1 Speaker connector

When combining several speakers/cabinets, you should always bear in mind the resulting overall impedance. Here are some brief explanations about different kinds of connections:

Serial connection: The individual impedance values of the connected speakers are added up. If two 4-Ohm speakers are connected to one another, there is an overall impedance value of 8 Ohms.

Parallel connection: If speaker/cabinets with identical impedance values are connected in parallel, the overall nominal impedance is reversely proportional to the number of speakers, e.g. if you connect two speakers/cabinets, the nominal impedance is halved; if you connect three speakers/cabinets, the nominal impedance is one third of the individual speakers’ impedance; with four speakers, it’s one quarter, and so on. For example, this way you can turn two 8-Ohm systems into one 4-Ohm system.

If four or more speakers/cabinets need to be connected, this can be done using a serial parallel connection. With four speakers with an impedance value of 4 Ohms each, the resulting overall impedance does not change.

+Whenever possible, try to use thick and short speaker cables to minimize power loss. Don’t lay output cables near input cables.

Wiring options for loudspeakers are additionally explained in the following illustrations and tables.

Fig. 4.1: Different types of connections

Number of speakers	2x	2x	2x	4x	4x	4x
Impedance of	4	8	16	4	8	16
each speaker (Ω)

Resulting impedance with	2	4	8	1	2	4
parallel connection (Ω)

Resulting impedance with	8	16	32	16	32	64
serial connection (Ω)

Resulting impedance with	-	-	-	4	8	16
serial parallel connection (Ω)

Table 4.1: Speaker wiring options and resulting impedance

+Please note that if the LINK connector is utilized, the BA and BB series bass cabinets only support parallel connections.

4.2 Audio connections

Fig. 4.2: Professional speaker connector with polarity allocation

Fig. 4.3: 1/4" TS connector

5. SPECIFICATIONS

High-power bass speakers	8 x 10" BUGERATM
	Aluminum cone speakers
Sensitivity	100 dB @ 1 W / 1 m
Impedance	4 Ohm
Frequency response	42 Hz - 16 kHz
Power (RMS / Music)	2,000 W
Tweeter	1" tweeter driver
SPEAKER CONNECTIONS
Input/Link
	2 professional
	speaker connectors,
	compatible with
	NEUTRIK® SPEAKON®
	(wired in parallel)
	as well as one 1/4" TS
	connector
DIMENSIONS/WEIGHT
Dimensions (W x H x D)	655 mm (25 4/5") x
	1312 mm (51 5/8") x
	407 mm (16")
Weight	ca. 80.0 kg (176 lb)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

8	5. SPECIFICATIONS

BA810 specifications

The Behringer BA810 is a versatile and powerful active loudspeaker designed to deliver high-quality sound performance for a wide range of applications. With its robust construction and advanced technology, the BA810 is suitable for musicians, DJs, and sound engineers who demand reliability and excellent audio quality.

One of the standout features of the BA810 is its 8-inch low-frequency driver, which provides deep and punchy bass response. This driver is paired with a 1.35-inch titanium compression driver that ensures clear and crisp high frequencies, making the speaker suitable for both music playback and vocal applications. The combination of these drivers allows the BA810 to deliver a balanced sound across the frequency spectrum, making it ideal for live performances, rehearsals, and events.

The Behringer BA810 boasts a powerful built-in amplifier with a peak power output of 1,000 watts. This ensures that the speaker can achieve high sound pressure levels while maintaining clear audio quality. The amplifier features state-of-the-art technology, including a sophisticated protection circuit to prevent overheating and overloading, ensuring the longevity and reliability of the speaker.

Portability is another key characteristic of the BA810. The speaker is lightweight yet ruggedly constructed, making it easy to transport to gigs or events. Its compact design allows for easy setup in various configurations. Additionally, the molded enclosure design helps minimize distortion and improve sound clarity, which is especially important in live sound scenarios.

The BA810 also features multiple input and output options, including XLR and 1/4-inch TRS inputs, allowing for easy connectivity with a range of audio sources. The speaker is equipped with an integrated mixer, enabling users to connect microphones, instruments, or other devices directly without the need for additional equipment.

Overall, the Behringer BA810 is a powerful and flexible active loudspeaker that offers exceptional sound quality and durability. Its unique combination of advanced features, portability, and ease of use make it an excellent choice for musicians, performers, and sound professionals looking for a reliable solution for their audio needs.