Model: PF112
PF112 Portable Speaker for iPod User Manual
Box Contents:
•PF112 Portable Speaker for iPod
•Docking cradles for iPod Models
•AC Adaptor
•Audio Cable
•User Manual
General Speaker setup:
•Select the correct iPod Cradle and insert into the iPod docking area
•Insert your iPod into the docking or plug the Stereo
•Connect the supplied Power Adaptor to the Power Outlet and PF112 Speaker; or insert 4 pcs of AA battery at the bottom of Speaker.
•Remark: the
Operation Instruction:
Power | Power LCD | Volume | Volume | Bass | ||
Indicator | Down | Up | ||||
|
|
|
|
|
|
|
•To Power on the unit: Press On/Off button on Top Panel of the unit
•To adjust the Volume: Press Volume Control button on the Top Panel of unit
•To turn on the Bass Booster Effect: Press the Bass button on the Top Panel of the unit
•To Power off the unit: Press On/Off button again
Power Green LED indicator (on the Speaker):
•LED Off – Power OFF
•LED ON – Power ON
Specification:
•Total 5W output (2.5W / Channel)
•Mid range (70mm x 30mm) Elliptical driver / Channel
•Distortion <= 10 % @ 3W
•S/N ratio:>65dB@1W
•Frequency Response: 200Hz – 16kHz
•Provided Power Adaptor: 5VDC @ 2A
•Dimension: 9.25 in x 4.33 in x 2.11 in (235 mm x 110 mm x 53.5 mm)
Compatibility (iPod) |
| |
• | iPod 1st touch |
|
• | iPod 2nd touch |
|
• | iPod Classic(80G Version only) |
|
• | iPod 4th nano |
|
• | iPod 3rd nano |
|
• | iPod 2rd nano |
|
Trouble Shooting: |
| |
| Sound not Clear or no sound | Please check the Cable or iPod connection |
| LED No Power | Please check the Power Cable connection |
|
| Please check the Battery Power |
|
| Press the Power On/Off button again |
| Sound is too Low/ too much | Press volume button to adjust |
| distortion | Adjust the volume of attached music device |
Too much distortion | Batteries are low, Replace batteries |
Battery Life | Clean the battery contacts and those of the devices prior to the battery installation. |
| Please remove the Batteries from the compartment, when it is not in use |
| Please Power Off the unit, when it is not in use |
| Do not use old and new batteries together |
Caution:
Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.