Front Panel Features, Installation, Precautions

Front Panel Features

The front panel houses the Power LED, which indicates whether the speakers (amplifier) power is on or off.

Power

LED

9.87 inches

HF Driver	LF Driver
(Tweeter)	(Woofer)

6.5 inches

Installation

For optimal performance of the iM05, please read the following thoroughly and carefully prior to installation.

Precautions

Handling: Please do not touch the speaker cones. The iM05 set is packaged in the box tightly, so your attention is required when taking the monitors out of the box. To avoid possible damage to the speaker units, hold both sides of the monitor in order to pull it out of the box. The speaker cones should not be touched in order to avoid damage even after they are out of the box.

Correct Power Operation: Since the iM05 contains its own amplifier, it must be connected to a power outlet using the detachable AC cable provided. Before connecting power, please make sure that the Voltage-Select Switch located on the speaker's rear panel is set to the appropriate position, as described in the rear-panel features list appearing earlier in this manual.

WARNING! - Use of improper voltage may result in hazardous conditions and/or damage to speaker components not covered by speaker warranty.

Connections: You can use either an XLR balanced cable or TRS balanced/unbalanced cable from the input of each iM05 to your corresponding preamp, computer or game console outputs. We recommend that you use high-quality balanced or unbalanced cables for input connections. Also, ALWAYS turn off the power of the iM05 and turn the volume of the iM05 down to a minimum before making the necessary connections.