user manual
QLight series
Mounting and Fixing
A versatile range of mounting hardware is available for the TQ-440 that allows it to be used in a variety of ways, in either mobile applications or permanent installations.
A top hat stand type fitting is mounted in the base of the cabinet for use with 35mm diameter loudspeaker stands with a load rating of at least 37kgs (82lbs).
This top hat fitting may also be used to mount the TQ-440 cabinet at the correct height above the complementary TQ-425 subwoofer using a straight 35mm pole.
Internal metric threaded rigging points are provided in several locations on the cabinet – on the top, bottom and sides - enabling it to be flown using standard M10 shoulder eyebolts (available from Turbosound). Downward inclination of the enclosure can be adjusted using an additional rigging point on the rear of the cabinet.
Side-mounted flying strips can be fitted to the sides of the enclosure by removing the countersunk bolts on the top and sides of the cabinet and replacing them with the M10 bolts provided with the hardware. Two FF-440 flying strips are required for each enclosure. This method offers a simple and cost effective method of flying single or multiple TQ-440 enclosures, with the load being taken through the steel strips rather than through the woodwork of the enclosure. Enclosures may be arranged in a vertical column by coupling the flying strips together using QL-75 quicklinks or shackles.
TQ-440 manual page 8