Soundstream Technologies SPL 60 owner manual Features, Location, Mounting

FEATURES

SPL 6 Midrange / Woofer

The SPL 6 is an excellent performer with a combination of high sensitivity, solid bass and smooth response throughout the audible range.

∙Lightweight Cone designed for good rigidity and high sensitivity

∙2 Ohm Voice Coil for increased output

SPL 1 Aluminum Dome Neodymium Tweeter

The SPL 1 tweeter is a high performance 1” Neodymium tweeter designed to deliver outstanding high frequency reproduction.

∙Black Aluminum 1" dome for improved power handling and linear response

∙Ferrofluid-immersed Voice Coil enhances heat dissipation

∙Vented Aluminum Voice Coil Former for superb heat dissipation and high power handling

SPL 6X Passive Crossover Network

The SPL 6X crossover consists of high quality, multi-element components with a two position tweeter level control. This allows tailoring high frequency output to the installation and individual preferences.

∙24 dB/octave Acoustic Summation Crossover Slopes

∙Variable tweeter control for added flexibility

∙Dynamic tweeter protection allows for improved power handling and continuous output

∙Ultra-low DCR Inductors for minimal signal loss (High power Ferrite in woofer path)

2 Ohm Nominal System Impedance

The 2 Ohm impedance design of the SPL 60 system provides an overall
	LOCATION
3 dB increase in output compared to a 4 Ohm design.		AND
∙ Effectively a doubling of Sound Pressure Level
		-- with the same
amplifier voltage output	MOUNTING

∙More stable, phase coherent load than two 4 Ohm speakers operating in parallel

3

60.pub	Friday, September 10, 1999 21:03
page 3