Soundstream Technologies SPL 60 Tweeter Tweeter Attenuation, Wiring SPL 6 Wiring Diagram

TWEETER Tweeter Attenuation

LEVEL The SPL 60 system has been designed to provide optimum sound in a variety of installation locations. The

CONTROL provided crossover allows for 2 positions of tweeter level control, 0dB and -3dB. A switch under the plastic crossover cover sets one of the two positions. The factory setting is 0 dB.

Tweeter Level

Control Switch

FIGURE 5

WIRING SPL 6 Wiring Diagram

Figure 6 shows a diagram illustrating the wiring of the SPL 60 Component Speaker System. It is important to make sure that all connections are in phase; that is positive (+) is connected to positive (+), and negative (-) is connected to negative (-) since an out-of-phase connection will cause a dislocated image and low bass output. We suggest using premium cable. The connectors provided with this system will accommodate wire from 12 gauge to 16 gauge.

Head Unit

Amplifier

SPL 6X

Crossover

SPL 1 Tweeter

SPL 6 Woofer

FIGURE 6

7