Tannoy DI6 DCT, DI6T, DI5T, DI8 DCT, DI5 DCT user manual Using Optional K-BALLTMBRACKET

Page 7

T H E

USING OPTIONAL K-BALLTMBRACKET

1.If attaching the

K-BallTMbracket to a flush mounted inwall conduit junction box (J-box), pass the speaker wire through the bracket adaptor plate then attach the adaptor plate to the J-box using the fixings provided.

5.Offer the speaker up to the K-BallTMBracket. Push the speaker onto the bracket to engage the euro plug.

TRANSFORMER

MODELS ONLY

9.Lift the grille trim using the tab to access the rotary transformer tapping switch. The rotary switch is found on the top of the Di5 models, and on the bottom of the Di6 and Di8 models.

2.Connect the speaker

wires to the connector block in the bracket.

For connection to an amplifier use pins 1 (+) and 2 (-)

Pins 3 (-) and 4 (+) are in parallel for connection to additional speakers in a distributed line.

6.Fit the rubber

grommet and finger- tighten the bracket bolt while supporting the speaker. If the connector has engaged properly the speaker

will lock onto the bracket

TRANSFORMER

MODELS ONLY

10.The Di5t and Di5

DCt models are fitted with 30W transformers.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

3.If a conduit junction

box has been used, offer the bracket up to

the adaptor plate, with the foam gasket** squeezed in between the J-box and the wall. Attach the bracket to the surface using a suitable fixing method*.

7.Swivel the speaker into position then use a 19mm wrench to give another 21/2 turns to ensure the speaker is locked in position.

TRANSFORMER

MODELS ONLY

11.The Di6t, Di6 DCt, & Di8 DCt models are fitted with 60W transformers.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

4.If you are attaching the bracket directly to a surface, offer the bracket up to the surface with the foam gasket** squeezed in between. Attach the bracket to the surface using a suitable fixing method*.

8.Connect a secondary support line to the safety tab at the rear of the cabinet.

NOTE

* See safety notices on page 3

**The foam gasket is intended to provide a water tight seal. Inclusion of the foam gasket is only a requirement if installing outdoors.

RANGE USER MANUAL

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Range Warranty Statement Declaration of Conformity Page Safety TAB Pole Mount Adaptor Balltmbracket Grille Grille Trim Yoke BracketTransformer Models only Using Supplied Yoke BracketUsing Optional K-BALLTMBRACKET Di5t and Di5 Using Pole Mount Adaptor with Optional K-BALLTMBRACKET Di5 Di6 Di8 Balltmbracket System Icttm ModelsAverage Dual Concentrictm ModelsNo maintenance of the Di loudspeaker is necessary Details of the Apparatus Inquiries@tannoyna.com
Related manuals
Manual 12 pages 37.54 Kb Manual 12 pages 6.34 Kb

DI6 DC, DI6, DI5T, DI5 DCT, DI6T specifications

The Tannoy DI5 is a sought-after loudspeaker that is part of Tannoy's DCT (Dual Concentric Technology) lineup, showcasing the brand's commitment to excellence in sound reproduction. Designed for both professional and home audio environments, the DI5 boasts a sleek design that complements modern aesthetics while delivering powerful audio performance.

One of the standout features of the Tannoy DI5 is its unique dual concentric driver configuration. This technology allows the high-frequency driver to be mounted at the center of the low-frequency driver. This alignment ensures that sound from different frequencies emanates from the same point, resulting in superior phase coherence and a wide soundstage. As a result, listeners experience an immersive audio experience with accurate imaging and clarity across the frequency spectrum.

The DI5 is equipped with a high-quality 5-inch woofer that produces a rich and detailed low-end response, while the 1-inch titanium dome tweeter delivers crisp and transparent high frequencies. Together, these elements create a balanced audio profile suitable for various applications, from music listening to studio monitoring. The speaker's frequency response spans from 60 Hz to 20 kHz, providing a full-range sound that captures both subtle nuances and powerful dynamics.

In terms of build quality, the Tannoy DI5 is constructed with durable materials that enhance its performance and longevity. The cabinet is designed to minimize resonance, which can color the sound. Additionally, the speaker features a front-firing bass port that allows for flexibility in placement, making it easier to position the DI5 in different environments while maintaining optimal performance.

Connectivity is another strong suit of the DI5, which includes a variety of input options to accommodate different technologies and devices. Whether connecting to a home audio system, workstation, or professional studio setup, users will find it easy to integrate the DI5 into their existing setups.

Overall, the Tannoy DI5 combines advanced technologies, thoughtful engineering, and high-quality components to deliver an exceptional listening experience. Whether for casual music enjoyment or critical studio work, the DI5 stands out for its ability to reproduce sound with accuracy and clarity, making it a valuable addition to any audio enthusiast's collection.
Top Page Image Contents