Tannoy DI5 DCT, DI6T, DI5T, DI8 DCT, DI6 DCT user manual Di5t and Di5

Page 8

IUSING OPTIONAL POLE MOUNT ADAPTOR IWITH SUPPLIED YOKE BRACKET

1.Use the supplied fixings to fix the yoke bracket to the pole bracket adaptor.

Note that the Di5 models require 2 fixing screws whereas the Di6 and Di8 models require 4 fixing screws.

5.Feed the speaker cable through the rubber grommet then connect the euro-type plug to the wires, observing the correct polarity.

9.Connect a secondary support line to the safety tab at the rear of the cabinet.

8

2.Fix the pole mount

bracket adaptor to the pole using the strapping provided. The bracket can be mounted in portrait or landscape orientations.

6.For connection to the

loudspeaker, use pins 1

(+) and 2 (-)

Pins 3 (-) and 4 (+) are in parallel for connection to additional speakers in a distributed line.

Note: Even if pins 3 and 4 are not used, they should be tightend to prevent the screws from vibrating.

TRANSFORMER

MODELS ONLY

10.Lift the grille trim

using the tab to access the rotary transformer tapping switch. The rotary switch is found on the top of the Di5 models, and on the bottom of the Di6 and Di8 models.

3.Remove the yoke

trims from the product to access the bracket fixing points.

7.Offer the speaker up

to the bracket and attach it using a 5mm alan key and supplied fixings.

TRANSFORMER

MODELS ONLY

11.The Di5t and Di5

DCt models are fitted with 30W transformers.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

4.Remove the rubber grommet from the rear of the speake. Inclusion of the rubber grommet is only required if installing the product outdoors.

8.Connect the euro plug then replace the rubber grommet to ensure the speaker is watertight.

TRANSFORMER

MODELS ONLY

12.The Di6t, Di6 DCt, & Di8 DCt models are fitted with 60W transformers.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

Image 8
Contents Range Warranty Statement Declaration of Conformity Page Safety TAB Grille Grille Trim Yoke Bracket Pole Mount Adaptor BalltmbracketUsing Supplied Yoke Bracket Transformer Models onlyUsing Optional K-BALLTMBRACKET Di5t and Di5 Using Pole Mount Adaptor with Optional K-BALLTMBRACKET Di5 Di6 Di8 Balltmbracket Icttm Models SystemDual Concentrictm Models AverageNo maintenance of the Di loudspeaker is necessary Details of the Apparatus Inquiries@tannoyna.com
Related manuals
Manual 12 pages 37.54 Kb Manual 12 pages 6.34 Kb

DI6 DC, DI6, DI5T, DI5 DCT, DI6T specifications

The Tannoy DI5 is a sought-after loudspeaker that is part of Tannoy's DCT (Dual Concentric Technology) lineup, showcasing the brand's commitment to excellence in sound reproduction. Designed for both professional and home audio environments, the DI5 boasts a sleek design that complements modern aesthetics while delivering powerful audio performance.

One of the standout features of the Tannoy DI5 is its unique dual concentric driver configuration. This technology allows the high-frequency driver to be mounted at the center of the low-frequency driver. This alignment ensures that sound from different frequencies emanates from the same point, resulting in superior phase coherence and a wide soundstage. As a result, listeners experience an immersive audio experience with accurate imaging and clarity across the frequency spectrum.

The DI5 is equipped with a high-quality 5-inch woofer that produces a rich and detailed low-end response, while the 1-inch titanium dome tweeter delivers crisp and transparent high frequencies. Together, these elements create a balanced audio profile suitable for various applications, from music listening to studio monitoring. The speaker's frequency response spans from 60 Hz to 20 kHz, providing a full-range sound that captures both subtle nuances and powerful dynamics.

In terms of build quality, the Tannoy DI5 is constructed with durable materials that enhance its performance and longevity. The cabinet is designed to minimize resonance, which can color the sound. Additionally, the speaker features a front-firing bass port that allows for flexibility in placement, making it easier to position the DI5 in different environments while maintaining optimal performance.

Connectivity is another strong suit of the DI5, which includes a variety of input options to accommodate different technologies and devices. Whether connecting to a home audio system, workstation, or professional studio setup, users will find it easy to integrate the DI5 into their existing setups.

Overall, the Tannoy DI5 combines advanced technologies, thoughtful engineering, and high-quality components to deliver an exceptional listening experience. Whether for casual music enjoyment or critical studio work, the DI5 stands out for its ability to reproduce sound with accuracy and clarity, making it a valuable addition to any audio enthusiast's collection.