Graco 965129, 965124 important safety instructions Fire and Explosion Hazard

Page 3

WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames, or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being dispensed to. Refer to Grounding on page 5.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop dis- pensing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being dispensed.

DKeep the dispensing area free of debris, including solvent, rags, and gasoline.

DDo not smoke in the dispensing area.

DDo not turn on or off any light switch in the area while dispensing if fumes are present.

DNever use 1.1.1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents, or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state, and national guidelines.

DAlways wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid and solvent manufacturer.

DThe air motor exhausts any fluids added to the input air.

DGraco does not manufacture or supply the reactive chemical components that may be used in this equipment and is not responsible for injury or property loss, damage, expense, or claims (direct or consequential) that arise from the use of such chemical components.

309407 3

Image 3
Contents Instructions Parts List Low-pressure, medium volume pump used to transfer greaseImportant Safety instructions Symbols Table of ContentsFire and Explosion Hazard Equipment Misuse Hazard Installation GroundingMounting the Pump Key Typical InstallationOperation MaintenancePressure Relief Procedure Startup and AdjustmentProblem Cause Solution Troubleshooting309407 Service Follow the Pressure Relief Procedure on Displacement Pump RepairDisassembly ReassemblyCheck Valve Adjustment 309407 Parts Description Qty Mounting Hole Layout DimensionsTechnical Data Sound Power LevelSound Pressure Level Graco Standard Warranty Graco InformationToll Free