Graco 308738C manual Fire And Explosion Hazard, Toxic Fluid Hazard

Page 4
FIRE AND EXPLOSION HAZARD

TOXIC FLUID HAZARD WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 5.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing/dispensing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed/dispensed.

DKeep the spray/dispense area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the spray/dispense area.

DExtinguish all open flames or pilot lights in the spray/dispense area.

DDo not smoke in the spray/dispense area.

DDo not turn on or off any light switch in the spray/dispense area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray/dispense area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

4308738

Image 4
Contents Instructions - Parts List Part No. 239326, Series A10 1 Ratio Presidentr Pump 308738CTable of Contents SymbolsWarning Symbol Caution SymbolMOVING PARTS HAZARD INJECTION HAZARDcal attention FIRE AND EXPLOSION HAZARD TOXIC FLUID HAZARDInstallation Prepare the OperatorPrepare the Site Mounting the PumpTypical Installation 6308738Installation F G E D C K Y H A J BSystem Accessories InstallationPressure Relief Procedure Starting and Adjusting the PumpOperation Flush the Pump Before First UseShutdown and Care of the Pump Flushing the PumpOperation COMPONENT RUPTURE HAZARDTroubleshooting ProblemSolution CauseDisconnecting the Displacement Pump ServiceReconnecting the Displacement Pump Parts Part No. 239326, Series APart DescriptionDimension DimensionsMeasurement Sound Power Levels dBa Technical Datatested in accordance with ISO Performance Chart Technical Data308738 cycles per minuteThe Graco Standard Warranty Graco InformationFOR GRACO CANADA CUSTOMERS Sales Office Minneapolis