Graco 3A0410D important safety instructions Tighten Fasteners, Mount the Pump, Ground the System

Page 9

Tighten Fasteners

Before mounting and using the pump for the first time, check and retorque all external fasteners. Follow Torque Instructions, page 14, or see the torque tag on your pump. After the first day of operation retorque the fasteners.

Mount the Pump

To avoid serious injury or death from toxic fluid or fumes:

•Ventilate to a remote area. The pump exhaust air may contain contaminants. See Air Exhaust Ven- tilation on page 11.

•Never move or lift a pump under pressure. If dropped, the fluid section may rupture. Always fol- low the Pressure Relief Procedure on page 12 before moving or lifting the pump.

1.Verify that the bolts holding the pump feet to the brackets are tight. Torque to 40-45 ft-lb (54-61 N•m) for Polypropylene and Stainless Steel, and 55-60 ft-lb (75-81 N•m) for Aluminum.

2.Secure the brackets to the floor. Do not mount on any other surface. The pump must be mounted upright.

Installation

4.For ease of operation and service, mount the pump so air valve, air inlet, fluid inlet, and fluid outlet ports are easily accessible.

Ground the System

The equipment must be grounded to reduce the risk of static sparking. Static sparking can cause fumes to ignite or explode. Grounding provides an escape wire for the electric current.

•Aluminum and stainless steel pumps have a ground screw. Always ground the entire fluid sys- tem as described below.

•Polypropylene pumps are not conductive and are not for use with flammable fluids.

•Follow your local fire codes.

Pump: See FIG. 3. Loosen the ground screw (N). Insert one end of a 12 ga. minimum ground wire behind the ground screw and tighten the screw securely. Connect the clamp end of the ground wire to a true earth ground. A ground wire and clamp, Part 238909, is available from Graco.

13in.

(33 cm)

See Dimensions drawings, pages 16 to 18.

Floor mounting holes

pump feet to bracket connection

ti18709a

N

ti16566a

FIG. 3. Ground screw and wire

Air and fluid hoses: Use only grounded hoses with a maximum of 500 ft (150 m) combined hose length to

FIG. 2. Mounting Diagram

3.Make sure the surface is flat and that the pump does not wobble.

ensure grounding continuity.

Air compressor: Follow manufacturer’s recommendations.

Fluid supply container: Follow local code.

3A0410D

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Important Safety Instructions See page 4 for model information, including approvalsStainless Steel Aluminum Polypropylene Related Manuals ContentsTo Order Replacement Parts To Specify the Configuration of a New PumpTo Find Your Nearest Distributor Distributor NoteII 2 GD c IIC T4 Configuration Number MatrixFire and Explosion Hazard Equipment Misuse Hazard Toxic Fluid or Fumes Hazard Key Accessories/Components Not Supplied InstallationOverview System ComponentsMount the Pump Tighten FastenersGround the System Fluid supply container Follow local codeFluid Outlet Line Fluid Supply LineFluid Inlet and Outlet Ports Air LineAir Exhaust Ventilation To provide a remote exhaustKey Start and Adjust the Pump Pressure Relief ProcedureOperation Flush the Pump Before First UseMaintenance Schedule Flushing and Storage MaintenancePump Shutdown LubricationFluid Cover Screws Air Valve Screws Torque InstructionsManifold fasteners Stainless SteelStainless Steel 10 22 15 21Aluminum Pump Dimensions Polypropylene Pump Dimensions Stainless Steel Pump Dimensions Performance Charts Fluid PressureAir Consumption Technical Data Inlet/Outlet Sizes WeightWetted parts Non-wetted external partsFluid Temperature Range Fluid Temperature RangeAluminum Pumps Polypropylene Pumps Technical Data 3A0410D Graco Information Graco Standard Husky Pump Warranty

3A0410D specifications

The Graco 3A0410D is a highly versatile airless paint sprayer that stands out for its durability, efficiency, and ease of use, making it an ideal choice for both professional contractors and DIY enthusiasts. This sprayer is designed to deliver a high-quality finish, allowing users to tackle a wide range of painting projects, from small residential tasks to large industrial jobs.

One of the main features of the Graco 3A0410D is its powerful electric motor, which is capable of producing pressures up to 3,000 PSI. This high pressure enables the sprayer to handle thick coatings and achieve excellent coverage, ensuring that users can complete their projects quickly and efficiently. The robust design is complemented by a durable frame and components, allowing it to withstand the rigors of regular use while maintaining performance.

The 3A0410D incorporates Graco’s ProConnect technology, which simplifies the replacement of the pump without the need for tools. This feature not only saves time but also minimizes downtime on job sites, allowing users to keep their projects on schedule. The unit also features an adjustable spray pressure, giving users the flexibility to adapt to various painting materials and surfaces, thus ensuring optimal results in every application.

Another notable characteristic is the Graco's SmartControl technology, which ensures a consistent spray pattern and pressure regardless of the surface area being covered or the material being used. This technology helps reduce overspray, allowing for more precise application and less waste.

The Graco 3A0410D is designed for easy maneuverability, featuring a lightweight and compact design, along with rugged wheels for easier transport over different terrains. Additionally, it is compatible with a wide range of accessories, including different nozzle sizes and filters, facilitating its use across various painting tasks.

In summary, the Graco 3A0410D airless paint sprayer is a reliable and efficient tool for anyone looking to achieve professional quality finishes. With its powerful performance, user-friendly features, and advanced technologies, it is an excellent investment for both occasional and frequent users, ensuring that any painting project can be completed with precision and ease.
Top Page Image Contents