3.2Free standing
Ensure that the floor, stage, platform or subwoofer is level and solid
Ensure that the front of the W8VDQ does not overlap the front edge of the stage, platform or subwoofer. System stability relies on the whole front width of the W8VDQ – not just it’s central foot Outdoor systems – or systems accessible by the audience – must be strapped down for safety Be aware that speakers producing very high power levels can vibrate, move or creep. Again, strapping will keep things safe
3.3Yoke assembly
A yoke assembly (Martin Audio ASF20025) is available for easy suspension.
WARNING:
Suspending the system should only be done by qualified personnel following safe rigging practices. Secure fixings are vital. Seek help from architects, structural engineers or other specialists if in any doubt.
ASF20025 Yoke assembly & fitting
Assemble the yoke assemblies as follows…
Important Note:
The yoke mounting point bolts must be removed in order to fit the yoke assembly. Always ensure that these bolts are replaced securely when the yoke is not in use.
Cabinet fittings
All material © 2008. Martin Audio Ltd. Subject to change without notice.