This policy avoids clipping transient peaks. Clipping not only sounds unacceptable but can seriously stress your system by dumping large amounts of distortion into the high frequency drivers - especially in passive mode.
Controllers
The W8VDQ must be used with a Martin Audio DX1.5, DX2 or Engineer controller system to ensure correct operation and protection.
DX1.5 (New for November 2008)
2 input, 6 output digital loudspeaker management system
The DX1.5 is a powerful
The unit is configurable using its versatile 2input – 6output routing matrix. Each input has adjustable gain, delay and equalisation. Each output consists of a high and low pass filter, parametric equalisaton, limiter, delay, gain and polarity controls.
DX2
4 input, 8 output digital loudspeaker management system
The
The DX2 is a comprehensive digital loudspeaker management system, capable of being easily configured to meet the most demanding applications in both fixed installation and live touring environments. It is fully compatible with XTA’s AudioCore remote control system.
Engineer
Installed system digital management processor
The Martin Audio Engineer 4in/8out and 8in/8out digital management processors provide comprehensive control and management of installed loudspeaker systems.
In addition to crossover, EQ and limiter functions, Engineer processors offer a flexible event scheduler, automatic programme level and tonality control to compensate for variations in programme sources and a unique
BassCreator is capable of extending the perceived range of small loudspeakers 1 to 1½ octaves below the resonance frequency of a loudspeaker without overloading the loudspeaker and without creating
See the following pages for DX1.5 and DX2 preset parameters…
All material © 2008. Martin Audio Ltd. Subject to change without notice.