MartinLogan Helos 10 user manual Connecting the Helos

Page 6

Figure 8.. Connecting the Helos 10.

Figure 9.. Installation step 6–7.

5Connect speaker cable. Be consistent when connecting speaker leads to the terminals on the Helos 10. Take great care to assign the same color to the (+) terminal on both the speaker and the amplifier.

WARNING! Turn your amplifier off before making or breaking any signal connections!

6Place speaker in hole.

7Use a 2-inch long #2 Phillips driver and an electric drill to lock all 3 mounting locks in place. Use a low clutch setting on the drill.

Installation

Page 5 Page 7
Image 6
Page 5 Page 7
Contents L o sTM Contents and Introduction Placement Channel installationInstallation Dimensions of the HelosCeiling Ceiling Joist Connecting the Helos Installation  Customizing and Painting Painting the Speaker Frame Painting the Speaker GrillRemoving the Logo Badge Frequently Asked Questions and Troubleshooting Frequently Asked QuestionsTroubleshooting Service SpecificationsWarranty and Registration General InformationGlossary of Audio Terms Glossary of Audio TermsLoudspeaker technology company
Top Page Image Contents