Installing a Niles MS110 MicroSensor

replaced cleanly if there is an unseen obstruction behind the wall. BE VERY CAREFUL NOT TO SAW THROUGH EXISTING WIRES, PIPES, OR STRUCTURE. IF YOU FEEL ANY EXTRA RESISTANCE AS YOU ARE CUTTING, STOP.

4.If you are cutting into lath and plaster walls, use masking tape to outline your penciled marks, drill the four corners with a 1/4” bit and use a razor to score the plaster down to the lath beneath. Then use a chisel to remove all of the plaster within the taped outline. Finally, insert a metal cutting blade into a sabre saw and very slowly and carefully saw the lath. Sawing the lath can easily vibrate plaster off the wall. If you have the patience, use a pair of tin snips to slowly nip away at the lath instead. There is no risk with this method, it is just time consuming.

5.Fill the wall cavity with insulation at this point. Remember to use equal amounts of insulation for each speaker.

6.Slip the mounting bracket through the hole and pull it toward you so that its front edge slides into the hole and stops in place.

7.Attach the frame to the bracket by screwing the frame to the bracket using the supplied screws. Do not overtighten the screws, this will distort the frame and the grilles will not fit (this is not perma- nent, just loosen the screws and the grille will pop in). The screws should pull the frame and bracket together (sandwiching the drywall) so that the frame is absolutely flush with the wall surface. There should be no gaps between the wall and the frame (See Figure 12).

Installation of the Speaker, Sensor and Grille in New or Existing Construction

There is a 1/2" round molded "IR Sensor Knockout" on the face of the speaker baf- fle. To prevent damage to the crossover network you must remove the knockout from the rear of the speaker. Do not attempt to remove the knockout with the speaker face up. Lay the speaker face down on a clean carpet or rug. Put the tip of a screwdriver into the center of the round "knockout" and sharply tap the screwdriver handle as necessary. Install the MS110 using its mounting hex nut and washer so that it is tightly secured to the speaker. Connect all wires and continue your installation.

Installation of the Speaker, Sensor and Grille in New or Existing Construction

HD8, HD5, HD6, HD8.3 specifications

Niles Audio, a reputable name in the world of custom audio systems, offers an impressive lineup of speakers designed to deliver exceptional sound quality for both residential and commercial applications. Among their standout models, the HD8.3, HD6, HD5, and HD8 offer unique features and technologies that cater to different listening environments.

Starting with the Niles Audio HD8.3, this model showcases a sophisticated 3-way design that includes an 8-inch woofer, a 4-inch midrange driver, and a 1-inch silk dome tweeter. This combination allows it to deliver deep bass, articulate mids, and crisp highs, making it ideal for large rooms where powerful sound is needed. The HD8.3 is engineered to integrate seamlessly with custom installations, featuring a low-profile design and paintable grilles.

The HD6 is a versatile option that excels in both performance and aesthetics. With a 6.5-inch woofer, a 4-inch midrange, and a 1-inch tweeter, the HD6 provides a balanced sound profile that works well in mid-sized spaces. One of its standout features is Niles’ proprietary Bass Reflex technology, which enhances low-frequency response without compromising overall clarity.

For those seeking a compact solution without sacrificing performance, the HD5 is an excellent choice. This model is equipped with a 5.25-inch woofer and a 1-inch tweeter, offering a surprisingly rich sound for its size. It is perfect for smaller rooms or areas where space is at a premium, yet still delivers robust audio that can fill a room.

Lastly, the HD8 combines advanced technology with superior craftsmanship. It features an 8-inch driver that provides potent bass while maintaining overall sonic balance. The HD8 is specifically designed for those who demand high fidelity in larger spaces and appreciate the depth of sound that it can provide. Like its counterparts, it also utilizes the same installation-friendly design, making it an ideal choice for custom home theaters.

All four models utilize Niles' high-quality materials and engineering techniques, ensuring durability and longevity. Each speaker is engineered to minimize distortion and deliver clear, true-to-life sound regardless of volume level. With their innovative designs and advanced audio technologies, the Niles Audio HD series continues to set a high standard for audio performance in custom installations. Whether you choose the HD8.3, HD6, HD5, or HD8, you can expect a premium listening experience that brings music and movies to life.