Niles Audio HD6, HD5, HD8.3 manual Installing the Speaker, Engage See Figure

Page 18

Installation of the Speaker and Grille in New or Existing Construction

Installing the Speaker

 

pushing the speaker for-

If the grille is already

 

ward until the s n a

p s

installed, remove it by using

 

engage (See Figure 16).

a bent paper clip or the tip

 

 

 

of a corkscrew and pulling

 

8. IMPORTANT:

 

it away from the frame

 

When installing

the

(See Figure 13).

 

speakers in the ceiling, or

Figure 13

if the installation is in an

1. Separate the speaker wire so

 

earthquake zone, it is recom-

that at least two inches of each

 

 

mended that you utilize the

conductor are free.

 

enclosed sheet metal screws to secure

 

2. Strip 1/2" of insulation from the end of

the baffle to the frame.

 

each conductor. (See Figure 1.)

a. Locate the dimples on the front baffle.

 

b. Place the self-tapping sheet metal

 

screw in the dimple and turn it with a

screw driver until it cuts through the baffle and anchors securely in the frame (See Figure 17).

Figure 1

3.To connect the stripped end of one con- ductor to the black terminal, push down on the black terminal lever. Insert the stripped end of the conductor into the opening. Release the pressure on the lever.

4. Repeat #3 with the other conductor and

Figure 16

the red terminal.

 

5.Connect the opposite ends of these con- ductors to their respective amplifier ter- minals. Pay attention to the markings on the wire. If you are unsure which con- ductor to insert into which terminal, see the section titled “Speaker Phase” in the owner’s manual.

6.Repeat these instructions for each speak- er you are connecting to the amplifier.

7.Place the speaker baffle in the frame by inserting the tabs at the base of the speaker baffle into the corre sponding holes in the frame and

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents D E L S Table of Contents Antiresonant Wave Bracing Snap-in Baffle AssemblyIntroduction Front-Mounted Bass & Treble ControlsMoisture Resistant Construction Easy Retrofit Installation in your Existing HomeBumpBack Woofer Magnet Absolutely Flush to the Wall AppearanceInstallation Considerations Recommended Amplifier PowerIncorporating a Local Volume Control Speaker Wire Incorporating a Remote ControlInsulating the Wall Cavity Speaker Placement Placement for Critical ListeningPlacement for Varying Listening Positions Placement for Home Theater Rear ApplicationsBoundary Effect Speaker Placement Installation Fundamentals Running the Speaker Wire in New ConstructionConcealing Speaker Wire Existing Walls Location Installation Fundamentals Installation Brackets, Frames ConstructionStage Two Before Paint Page Installation Brackets, Frames Grilles Existing Walls Installing a Niles MS110 MicroSensor Installing the Speaker Engage See FigureSee Figure Speaker Phase Adjusting the Bass and Treble ControlsAdjusting the Tweeter Installing the GrilleOperation Listening at Higher VolumesCleaning Removing The SpeakerSpecifications Model HD5 Model HD6Model HD8 Model HD8.3 Page Page Page Page Niles Audio Corporation
Related manuals
Manual 28 pages 46.65 Kb Manual 2 pages 60.36 Kb

HD8, HD5, HD6, HD8.3 specifications

Niles Audio, a reputable name in the world of custom audio systems, offers an impressive lineup of speakers designed to deliver exceptional sound quality for both residential and commercial applications. Among their standout models, the HD8.3, HD6, HD5, and HD8 offer unique features and technologies that cater to different listening environments.

Starting with the Niles Audio HD8.3, this model showcases a sophisticated 3-way design that includes an 8-inch woofer, a 4-inch midrange driver, and a 1-inch silk dome tweeter. This combination allows it to deliver deep bass, articulate mids, and crisp highs, making it ideal for large rooms where powerful sound is needed. The HD8.3 is engineered to integrate seamlessly with custom installations, featuring a low-profile design and paintable grilles.

The HD6 is a versatile option that excels in both performance and aesthetics. With a 6.5-inch woofer, a 4-inch midrange, and a 1-inch tweeter, the HD6 provides a balanced sound profile that works well in mid-sized spaces. One of its standout features is Niles’ proprietary Bass Reflex technology, which enhances low-frequency response without compromising overall clarity.

For those seeking a compact solution without sacrificing performance, the HD5 is an excellent choice. This model is equipped with a 5.25-inch woofer and a 1-inch tweeter, offering a surprisingly rich sound for its size. It is perfect for smaller rooms or areas where space is at a premium, yet still delivers robust audio that can fill a room.

Lastly, the HD8 combines advanced technology with superior craftsmanship. It features an 8-inch driver that provides potent bass while maintaining overall sonic balance. The HD8 is specifically designed for those who demand high fidelity in larger spaces and appreciate the depth of sound that it can provide. Like its counterparts, it also utilizes the same installation-friendly design, making it an ideal choice for custom home theaters.

All four models utilize Niles' high-quality materials and engineering techniques, ensuring durability and longevity. Each speaker is engineered to minimize distortion and deliver clear, true-to-life sound regardless of volume level. With their innovative designs and advanced audio technologies, the Niles Audio HD series continues to set a high standard for audio performance in custom installations. Whether you choose the HD8.3, HD6, HD5, or HD8, you can expect a premium listening experience that brings music and movies to life.
Top Page Image Contents