Niles Audio DS6.3, DS6.5, DS6.7 Installation in New Construction, Insulating the Ceiling Cavity

Page 14

Installation in New Construction

Installation in New Construction

Insulating the Ceiling Cavity

If feasible, fill the ceiling cavity with insu- lation at this point.

Mounting the

New Construction Bracket

The hole saving bracket enables a faster and cleaner final installation of the speak- er. It forces the drywall installer to cut out the speaker hole for you and provides wire ties for the speaker wire, reducing the risks of accidental loss or movement of the wire. In addition, it enables you to align your speakers with other ceiling fixtures with great accuracy since you can really see exactly where the speaker will be.

To install the bracket, first attach the QuickSnapnew construction wings to the bracket by snapping them into the sides of the bracket. The wings can be shortened by breaking them along the scored lines if the length will interfere with corner or eaves.

The wings and brackets have centering lines to simplify placement of the speakers.

Screw one side of the assembled bracket with wings to the joist using one of the supplied screws. Level the bracket. Screw the other side of the bracket/wing assem- bly to the joist. Two screws on each side make for a very secure installation. Secure the wire to the bracket using bracket’s wire tie. The drywall installers will cut the drywall to the exact size of the bracket.

(See Figure 12)

Concealing Speaker Wire for a Future Installation

Attach the speaker wire in a loop between the ceiling joists and carefully mark the exact location of the wire on a set of plans. Ask the general contractor to inform the drywall installers that the speaker wire loops are concealed for future installa- tions. (See Figure13)

Figure 12

Figure 13

The optional hole saving brackets are installed

The speaker wire is looped and hung on two

and the speaker wire is attached to the bracket.

nails attached to the joists securing it for

 

future use. Make sure the location is noted

 

on house plans.

13

Image 14
Contents DS6.3 Table of Contents Introduction Twist & Lock Baffle Features and BenefitsEasy Installation Hole Saving BracketRecommended Amplifier Power Installation ConsiderationsInstallation Considerations Insulation Behind The Speaker Speaker WireIncorporating Remote Control Introduction Speaker PlacementPlacement for Critical Listening Placement for Varying Listening Positions Placement for Home Theater Rear ApplicationsBoundary Effect Installation Fundamentals Running the Speaker Wire in New ConstructionConcealing Speaker Wire Existing Walls Pulling the CableSpeaker Location Volume Control Stereo Installation Fundamentals Mounting New Construction Bracket Installation in New ConstructionInsulating the Ceiling Cavity Installation in Existing Construction Installation in Existing ConstructionFinal Installation in New or Existing Construction Final Installation in New or Existing ConstructionDirecting the tweeter Operation Listening at Higher VolumesCleaning OperationsSpecifications SpecificationsDS6.7 Detach Here WA R R a N T Y R E G I ST R AT I O N C a R D Limited Warranty Limited WarrantyNiles Audio Corporation