Niles Audio DS6.3, DS6.5 manual DS6.7

Specifications

Specifications

DS6.7

Driver Compliment

High Output injection molded graphite reinforced polypropylene woofer with shorting ring and butyl rubber surround in an integrated patent-pending pivoting mount, (15° pivot angle)

1" fluid-cooled ultra-wide dispersion tri-laminate Teteron dome tweeter in a patent pending low diffraction pivoting mount, (17° pivot angle)

Recommended Amplifier Power 10 to 150 watts per channel

Tone Controls

Bass jumper: flat, -1dB and -2dB Baffle-mounted Treble controls: -1.5dB, flat and +1.5dB

Nominal Impedance 4 or 8 ohm selectable

Frequency Response

48Hz to 22kHz, +/- 3dB (on axis)

Sensitivity

89dB for 2.83 volts of Pink Noise

Overall Exterior Frame Dimensions 9-7/8" diameter

Depth Behind Wall

6" deep (based on 1/2" drywall)

Hole Cut-Out Dimensions 8-5/8" diameter

Wiring Requirements

Patented two-piece, no strip speaker wire terminal, accommodates 12–18 gauge wire. We recommend 16–18 gauge stranded wire for up to 80 feet, 14 gauge stranded wire for up to 200 feet.drywall)

19