Samson dB500a manual DB500a System Set Up

Page 15

This example shows a typical PA system using mixer with a pair of dB500a’s for the main left and right mix. A separate signal from the mixer’s AUX/MONITOR bus is sent to two additional dB500a’s placed in the tilt-back, wedge positions for use as floor monitors. In order to increase the output of the monitor system, the use of an external graphic equalizer like one of the Samson “E” or “S curve” series is highly recommended.

Live Band PA System With Monitors

dB500a System Set Up

Image 15

Contents Sound Reinforcement Important Safety Instructions Table of Contents Introduction DB500a Features DB500a Front View Layout DB500a LayoutSamson DB500a Rear Panel LayoutUsing a Microphone Using a Line Level SignalQuick Set-Up Positioning the dB500a Microphone Positioning How to Reduce FeedbackSpeaker Placement Using the dB500a as a Floor MonitorOperating the dB500a Using the Equalizer SectionOptimax Limiter MIC XLR InputLine Combo Balanced Input Using Speaker Stands Setting Up Your dB500a SystemImportant Note Hanging Permanent InstallationCompact Lounge PA for Two DB500a System SetDB500a System Set Up Connecting the dB500a DB500a Wiring GuideDB500a Specifications Page