dB500a REAR PANEL |
| |
1 | MIC LEVEL – Used to adjust the volume of the | 1 |
| microphone input. |
|
|
| 15 |
2AMP / CLIP LED - Dual color LED lights Green when amp is active, flashes Red when the amp is clipped or stays Red indicating the amplifier is in protect mode.
3LINE LEVEL – Used to control the level of the line input.
4LOW FREQUENCY - Controls the low band
of the Channel Equalizer, +/- 12 dB at 100Hz. | 14 |
5HIGH FREQUENCY - Controls the high band of the Channel Equalizer, +/- 12 dB at 10kHz.
13
6LIMITER SWITCH - Used to engage the dB500a’s Optimax dynamics processing. A red LED will illu- minate indicating the Optimax is on.
7OUTPUT SWITCH - This switch is used to select the signal that is sent to the Line Output. When the switch is in the up position, the signal on the Line Output is exactly the same as the signal on the Input. When the switch is in the down position the Line Output carries the MIX of the Mic and Line Inputs, as well as the High and Low Equalizer and Low Filter.
8FILTER SWITCH - When engaged, a
filter is employed at 80Hz with a
9LINE INPUT CONNECTOR - Combo XLR plus 1/4 inch Input for connecting balanced or unbalanced line level signals.
10HEAT SINK - Convection cooling of the internal power amplifier via massive aluminum extrusion.
11POWER – Switches on the dB500a’s main power.
12AC POWER INLET – Connect the supplied standard IEC AC power cable here.
13LINE OUTPUT - Male XLR connector used to link multiple dB500a’s.
14MIC INPUT CONNECTOR - XLR Input for connecting low impedance microphones to the
15PEAK LED- Red LED illuminates when the Mic input receives a clipped signal.
dB500a Layout
dB500a Rear Panel Layout
2 | 3 | 4 | 5 |
SAMSON |
|
|
|
|
| 6 | ||
|
|
|
|
|
| |||
|
|
|
|
| 4 | 4 | 4 | 4 |
|
| AMP / CLIP |
|
| 8 | 8 8 | 8 | |
|
|
|
|
|
|
|
| |
0 | 10 |
| 0 | 10 | 12 | 12 | 12 | 12 |
MIC LEVEL | PROTECTION | LINE LEVEL |
| EQUALIZER |
| |||
|
|
|
|
| LOW 100Hz | HIGH 10KHz | ||
P E A K |
|
|
|
|
|
|
|
|
MIC INPUT | LINE OUTPUT | LINE INPUT |
|
|
|
| ||
7
8
9
10
MADE IN CHINA
www.samsontech.com
dB500A
DESIGNED AND ENGINEERED IN THE UNITED STATES BY SAMSON TECHNOLOGIES
12 | 11 |
5