Insignia NS-S4000 manual Connecting the AC power adapter, Installing batteries

Insignia NS-S4000 Clock Radio with iPod Dock

Connecting the AC power adapter

To connect the AC power adapter:

1Plug the power cord into the DC jack on the back of your clock radio with iPod dock.

2Plug the other end of the AC power adapter into a 120V AC 60 Hz power outlet.

Installing batteries

Note:

Lithium coin batteries are installed in the remote control and the clock radio with iPod dock at the factory.

Warning:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

To replace the battery in the remote control:

1Slide and pull to release the battery cover latch.

Slide

Pull

2Match the polarity on the lithium cell (CR2025-3V) with the plus sign (+) on the battery tray.

+

CR2025

3V

3Slide the tray with new battery into the battery compartment until it clicks into place.

To replace the battery for the clock:

1Open the battery compartment by pressing the small tab of the battery cover.

www.insignia-products.com13