EAW MQV2394e specifications Features, Description, Application, Performance, Physical

Page 1

SPECIFICATIONS MQV2394e

FEATURES

Full-range, 3-way system

2x 15-in LF; 2x 10-in horn-loaded MF; 2-in exit Neodymium HF

90° x 40° beamwidth

Horizontally configured to create vertical arrays

DESCRIPTION

A 3-way, full-range system in a vented trapezoidal enclosure. Includes dual, slot-loaded 15-in woofers, dual, horn-loaded 10-in MF cones with Radial Phase Plug™, and a 2-in exit/3-in diaphragm Neodymium compression driver. The MF and HF horns provide a nominal 90° x 40° beamwidth. An internal passive crossover with jumpers on the input panel allows user selection of either bi-amplified or passive operation. In either case digital signal processing is required to achieve specified performance. The enclosure features a comprehensive system of 3/8”-16 threaded suspension points.

APPLICATION

The MQV2394e combines the MQ Series LF/MF/HF components into a full-range, single-enclosure loudspeaker. It is horizon- tally configured for arraying in vertical columns. This arrange- ment is typically used in sports arenas and other venues where the array must address wide, vertical audience angles. Dual LF and MF components produce greater output than MQV1300 series products. The MF/HF horns in the MQV2394e feature a rigid but well-damped construction using wood veneer backed by structural foam. A no-compromise design means the mid and high frequency horns are truly large enough to provide optimal pattern control throughout each passband.

Application Usage: Install

 

Houses of Worship

Auditoriums

Theatres

Arenas

Performing Arts Centers

Stadiums

PERFORMANCE

Frequency Response

±3 dB 72 Hz to 15 kHz -10 dB 50 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

LF 97

MF/HF 107

MF 110

HF 106

Impedance (Ohms)

LF 4

MF/HF 4

MF 4

HF 8

Power Handling, AES Standard (Watts)

LF 1200

MF/HF 800

MF 800

HF 150

Calculated Maximum Output (dB SPL @ 1m)

LF Peak/Long Term 134/128

MF/HF Peak/Long Term 142/136

MF Peak/Long Term 145/139

HF Peak/Long Term 134/128

Nominal Coverage Angle, -6 dB Points (degrees)

Horizontal 90

Vertical 40

Recommended High-Pass Frequency

24 dB/Octave 50 Hz

PHYSICAL

LF

2x 15-in, vented

MF

2x 10-in horn loaded cone,

HF

Radial Phase Plug™

2-in exit/3-in diaphragm voice

 

coil compression driver on cons-

Configuration

tant directivity horn

Three-way, full range

Powering

Bi- or Tri-amplified

Enclosure Materials

Exterior grade Baltic birch plywood

Finish

Wear-resistant textured black paint

Connectors

Terminal barrier strip

Suspension Hardware

16x 3/8”-16 threaded mounting

 

points (4 each on top, bottom

Grille

and sides)

 

Powder coated perforated steel

Dimensions

inches

millimeters

Height (front)

36.71

932

Height (rear)

25.36

644

Width

56.25

1429

Depth

25.59

650

Trapezoid Angle

12.5 Degrees per Side

Weights

pounds

kilograms

Net Weight

300

136.4

Shipping Weight

330

149.7

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

info@eaw.com www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice.

MQV2394e/0002693/002/2 pp

October 2003

Printed in USA

Image 1
Contents Description FeaturesApplication PerformanceSpecifications Dimensional Drawing