EAW MQV2394e specifications Dimensional Drawing, Specifications

SPECIFICATIONS MQV2394e

DIMENSIONAL DRAWING

C

L

15.71

8.08

(1.95)

52.35

A & E SPECIFICATIONS

The 3-way full-range loudspeaker shall incorporate two 15-in slot-loaded woofers, two 10-in MF cones with Radial Phase Plug™, and a 2-in exit/3-in diaphragm HF compression driv- er. The MF and HF devices shall be loaded on horns that pro- vide a nominal 90° x 40° beamwidth. An internal passive crossover network shall offer either bi- or tri-amplified oper- ation, configurable via jumpers on the input panel.

VIEW A-A

DIMENSIONS

APPLY

TO TOP AND

BOTTOM

56.25

36.71

GRILLE PARTIALLY SHOWN

FRONT

A				2X ACCESS PANEL
			10.92	4.00
		25.59
7.50		A		INPUT
		15.34
			5.00
25°	C		C
29.61		22.81
	L		L
		(25.36)
		12.50		27.50
		SIDES
				BACK

System frequency response shall vary no more than 63 dB from 70 Hz to 15 kHz measured on axis. The LF section shall produce a sound pressure level of 97 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of pro- ducing a peak output of 134 dB SPL on axis at 1 meter. The LF section shall handle 1200 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms.

When operated in bi-amplified mode, the MF/HF section shall

APPLY DIMENSIONS

TO BOTH SIDES

NOTES:
1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).
2. SYMBOL INDICATES CENTER OF BALANCE.
3. WEIGHT APPROX. 300 LBS.	0002331(A) 9/11/02
4. SHIPPING WEIGHT APPROX. 330 LBS.

Manufacturing tolerances are +/-0.13 and +/-1°

produce a sound pressure level of 107 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 142 dB SPL on axis at 1 meter. The MF/HF section shall handle 800 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms.

When operated in tri-amplified mode, the MF section shall produce a sound pressure level of 110 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 145 dB SPL on axis at 1 meter. The MF section shall handle 800 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms. The HF section shall produce a sound pressure level of 106 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 134 dB SPL on axis at 1 meter. The HF section shall handle 150 watts of amplifi- er power (AES Standard) and shall have a nominal impedance of 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be fin- ished in wear-resistant textured black paint. Input connectors shall be a terminal strip. A total of 16x 3/8”-16 threaded mounting/suspension points (4 each top, bottom, and sides) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The 3-way full-range loudspeaker shall be the EAW model MQV2394e.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQV2394e/0002693/002/2 pp	October 2003	Printed in USA