EAW MQV2364e specifications Features, Description, Application, Performance, Physical

SPECIFICATIONS MQV2364e

FEATURES

•Full-range, 3-way system

•2x 15-in LF; 2x 10-in horn-loaded MF; 2-in exit Neodymium HF

•60° x 40° beamwidth

•Horizontally configured to create vertical arrays

DESCRIPTION

A 3-way, full-range system in a vented trapezoidal enclosure. Includes dual, slot-loaded 15-in woofers, dual, horn-loaded 10-in MF cones with Radial Phase Plug™, and a 2-in exit/3-in diaphragm Neodymium compression driver. The MF and HF horns provide a nominal 60° x 40° beamwidth. An internal passive crossover with jumpers on the input panel allows user selection of either bi-amplified or passive operation. In either case digital signal processing is required to achieve specified performance. The enclosure features a comprehensive system of 3/8”-16 threaded suspension points.

APPLICATION

The MQV2364e combines the MQ Series LF/MF/HF components into a full-range, single-enclosure loudspeaker. It is horizon- tally configured for arraying in vertical columns. This arrange- ment is typically used in sports arenas and other venues where the array must address wide, vertical audience angles. Dual LF and MF components produce greater output than MQV1300 series products. The MF/HF horns in the MQV2364e feature a rigid but well-damped construction using wood veneer backed by structural foam. A no-compromise design means the mid and high frequency horns are truly large enough to provide optimal pattern control throughout each passband.

Application Usage: Install
Houses of Worship	Auditoriums	Theatres
Performing Arts Centers	Arenas	Stadiums

PERFORMANCE

Frequency Response

±3 dB 72 Hz to 15 kHz -10 dB 50 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

LF 97

MF/HF 108

MF 110

HF 108

Impedance (Ohms)

LF 4

MF/HF 4

MF 4

HF 8

Power Handling, AES Standard (Watts)

LF 1200

MF/HF 800

MF 800

HF 150

Calculated Maximum Output (dB SPL @ 1m)
LF Peak/Long Term	134/128
MF/HF Peak/Long Term	140/134
MF Peak/Long Term	142/136
HF Peak/Long Term	136/130
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal	60
Vertical	40
Recommended High-Pass Frequency
24 dB/Octave	50 Hz

PHYSICAL

LF Subsystem	2x 15-in, vented
MF Subsystem	2x 10-in horn loaded cone,
HF Subsystem	Radial Phase Plug™
	1x 2-in exit/3-in voice coil com
	pression driver on constant
Configuration	directivity horn
	Three-way, full range
Powering	Bi- or Tri-amplified
Enclosure Materials	Exterior grade Baltic birch plywood
Finish	Wear-resistant textured black paint
Connectors	Terminal barrier strip
Suspension Hardware	16x 3/8”-16 threaded mounting
	points (4 each on top, bottom
Grille	and sides)
	Powder coated perforated steel
Dimensions	inches	millimeters
Height (front)	36.71	932
Height (rear)	25.36	644
Width	56.25	1429
Depth	25.59	650
Trapezoid Angle	12.5 Degrees per Side
Weights	pounds	kilograms
Net Weight	300	136.4
Shipping Weight	330	150.0

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQV2364e/0002692/002/2 pp	October 2003	Printed in USA