Focal 1000 Be specifications Fine tune

Page 10

fine tune

Accessories

Floorstanding loud-speaker systems include four decoupling spikes and four butyl cone and could be screwed, if necessary, into the four metal inserts situated on the base of the loudspeaker. These spikes ensure a better stability for floorstanding speakers, particularly if the floor is not perfectly flat and smooth. This stability improves clarity in bass and midrange by decoupling the system from the floor and thus reducing floor- born resonances.This required stability allows the energy delivered by the woofer’s membrane to be integrally converted into sound. The enclosed spikes are adjustable in height. After having adjusted the height of the spikes, don’t forget to lock them with the locknut.

When the use of the spikes proves to be necessary, we advise you to place a piece of metal (such as a coin) between the floor and the spike in order to avoid scratching a tiled floor. Bookshelf speakers can be placed on an optional stand specially developed for them.

Cable

Don’t underestimate the importance of the cable: make sure you chose the appropriate section and length. Let your retailer advise you.

Foam Bung for Bass Tuning (Electra 1007 Be only)

This foam bung allows you to make some fine adjustments to the bass performance of your loudspeakers. The Electra 1000 Be loudspeakers have been designed to reproduce deep bass in an even manner for a «free space» position. If you position your loudspeakers close to a wall, bass frequencies are further enforced. Similarly, some rooms have an acoustic that exaggerates low bass. The foam bung allows you to reduce the amount of energy from the port to reduce bass level and improve damping in such situations.

It is advised that you use the foam bung for both loudspeakers. Insert the foam bung into the port tube until it is flush with the front surface.

About amplifiers

Contrary to what one might think, it is not a too powerful amplifier that might damage a loudspeaker, but rather a lack of power. Actually if the output level of the amplifier is too high it will saturate and distort which will irremediably damage the tweeter.

The power handling and frequency response of the loudspeakers is good enough to highlight the qualities or weak points of the amplifiers they are combined with. Let your retailer help you make the right choice, matching your personal taste and budget.

Conditions of guarantee

All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor in your country.

Your distributor can provide all details concerning the conditions of guarantee. Guarantee cover extends at least to that granted by the legal guarantee in force in the country where the original purchase invoice was issued.

 

 

 

 

 

 

Your Focal-JMlab product was developed and manufactured with high-quality materials and components

 

 

 

 

 

 

which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment

 

 

 

 

 

 

 

 

 

 

 

must be disposed of separately from normal garbage at the end of its operational lifetime.Please dispose

 

 

 

 

 

 

of this product by bringing it to your local collection point or recycling centre for such equipment. This

10

 

 

 

 

 

will help to protect the environment in which we all live.

 

 

 

 

 

Image 10
Contents Electra beryllium 1000 Be Tel. +33 04 77 43 57 00 Fax +33 04 77 43 57Page If the dome is broken in any Special precautions regarding the Beryllium dome tweeterRunning-in period Installation Example PositioningAccording to the particular disposition of the room fig. a ConnectionsMultichannel CC 1000 Be center loudspeaker positioning Loudspeakers choiceMagnetic disturbance Front  and Front , according to speaker direction fig. KPage SR 1000 Be Fine tune Specifications DriversPage Période de rodage Mise en gardePrécaution importantes Mise en œuvre Choix de l’emplacement ExempleMulticANAL Choix des enceintes Placement de l’enceinte centrale CC 1000 BeMode Bi/Twin SR 1000 Be Perturbations magnétiques7.1 Twin mode Précautions d’utilisation Mode bipolaireDe la SR 1000 Be centrale bipolaire Fig. M Mode Twin 6.1 ou Et la voie surround centrale arrière sur l’entrée  fig. NTube de mousse pour évent AccessoiresRÉGLAges fins Choix de l’amplificateurCaractéristiques Haut-parleursFIN SLO Date Comment / Commentaire Date Comment / Commentaire Date Comment / Commentaire International Guarantee Information given on this page will remain confidentialGarantie France Nous garantissons la confidentialité de ces informations