| INSIDE THIS INSTRUCTION MANUAL |
| |||
Important Safety Instructions / Specifications |
| 2 | |||
Important Information |
|
| 3 | ||
Amplifier Descriptions |
|
| 4 | ||
|
| ||||
Contact Information |
|
| 8 | ||
IMPORTANT SAFETY INFORMATION | HEED ALL WARNINGS |
| |||
1) | Read these instructions. |
|
|
|
|
2) | Follow all instructions |
| WARNING: To reduce the risk or fire or | ||
3) | Keep these instructions | CAUTION |
|
|
|
|
| RISK OF ELECTRIC SHOCK | electrical shock do not expose this | ||
4) | Heed all warnings | DO NOT OPEN | equipment to rain or moisture. |
| |
5) | Do not use the MATRIX 1000 near water. Be |
|
|
|
|
| extra cautious when moving the system during | CAUTION: Connect the power cable only after you have absolutely made | |||
| rain or while transporting the system over wet | sure that the local mains voltage matches the voltage specified on the | |||
| surfaces as water might splash onto the amplifier. |
|
|
|
|
6) | Clean only with dry cloth. | device. If you connect to the wrong voltage, you may destroy the elec- | |||
7) | Do not block any ventilation openings. Install | tronic components of the MATRIX 1000 system. |
| ||
| in accordance with manufacturer’s instructions. | See page 4 for a complete description of | |||
8) | Do not install near heat sources such as |
|
|
|
|
| radiators, stoves or other devices that may | AMPLIFIER SPECIFICATIONS: |
|
| |
| produce heat. | Subwoofer Power Output: |
| 400 W / 8 Ohms @ 1% THD |
|
9) Do not defeat the safety purpose of the | 10” |
| 150 W / 4 Ohms @ 1% THD |
| |
| polarization or | Line in: |
| XLR Female |
|
| polarized plug has two blades with one wider | Parallel out: |
| XLR Male |
|
| than the other. A | Input Impedance: |
| 48 k Ohms |
|
| blades and a third grounding prong. The wide | Speaker Out: |
| Speakon NL4 Style Connector |
|
| blade or the third prong is provided for your | Power Requirement: |
| 115V<>50/60Hz<>10A |
|
| safety. If the provided plug does not fit your |
|
| 230V<>50/60Hz<>6A |
|
| outlet, consult an electrician for replacement | ACTIVE CROSSOVER: |
|
|
|
| of the obsolete outlet. | Crossover Frequency: |
| 120 Hz; 24 dB/ Octave |
|
10) | Protect the power cord from being walked on |
|
|
|
|
| or pinched, particularly at the plug and the | SUBWOOFER: |
|
|
|
| point where it exits the MATRIX 1000 amplifier. | Speaker: |
| 1 x 15” Custom Built | |
11) Only use attachments / accessories specified | Nominal Impedance: |
| 8 Ohms |
| |
| by | Subwoofer Freq. Response: |
| 40 Hz – 120 Hz +/- 3dB |
|
12) | Use caution when transporting the system to | Sound Pressure Level (1w/1m): | 102 dB (half space) |
| |
| avoid injury from | Max. SPL: |
| 127 dB @10% THD |
|
13) | Unplug the MATRIX 1000 during lightning | Weight: |
| 115 lbs |
|
| storms and when not in use. | Dimensions (Transport): |
| 28” (H) x 19” (W) x 23” (D) |
|
14) | Refer all servicing to qualified to personnel. |
|
|
|
|
| Servicing is required when the MATRIX 1000 | 10” |
|
|
|
| has been damaged in any way such as when | Speaker Input: |
| Speakon style connector |
|
|
|
| (pin 1+ = +, pin 1- = |
| |
| been spilled into the cabinets, the unit has | LF/MF Woofer: |
| 1 x 10” Custom Built | |
| been exposed to moisture or rain, does not | HF Driver: |
| 1 x 3/4” Titanium Diaphragm on CD Horn | |
| operate normally, or has been dropped. | HF Dispersion: |
| 90O x 40O |
|
15) | To reduce the risk of fire or electric shock, do | Nominal Impedance: |
| 4 Ohms |
|
| not expose the MATRIX 1000 to rain or moisture. | Active Freq. Response: |
| 120 – 19K Hz +/- 3dB |
|
16) The MATRIX 1000 is not intended for outdoor | Crossover Frequency (passive): | 2.5 kHz; 12 dB / Octave |
| ||
| fixed installations or in high moisture areas. | Sound Pressure Level (1w/1m): | 101 dB (half space) |
| |
| Moisture can damage the speakers and can | Max. SPL: |
| 124 dB @10% THD |
|
| use cause corrosion of electrical contacts. | Weight: |
| 25 lbs |
|
| Keep speakers out of extended or intense | Dimensions (Upright): |
| 19” (H) x 12” (W) x 11” (D) |
|
| direct sunlight. The subwoofer spider and |
|
|
|
|
| surround will prematurely dry out and finished | COMPLETE SYSTEM: |
|
|
|
| surfaces may fade and be damaged by long- | Weight: |
| 165 lbs |
|
| term exposure to intense | Dimensions (Transport): |
| 39” (H) x 19” (W) x 23” (D) |
|
2 |
| Note: Specifications are subject to change without notice |
| ||