SECTION 4
MECHANICAL ADJUSTMENTS
1.Clean the following parts with a
record/playback head | pinch roller |
erase head | rubber belt |
capstan | idlers |
2.Demagnetize the record/playback head with a head demagne- tizer. (Do not bring the head demagnetizer close to the erase head.)
3.Do not use a magnetized screwdriver for the adjustments.
4.After the adjustments, apply suitable locking compound to the parts adjusted.
5.The adjustments should be performed with the rated power supply voltage (2.5 V) unless otherwise noted.
Torque Measurement
Mode | Torque Meter | Meter Reading | |
FWD |
| 2.16 - 4.7 mN•m | |
| (22 - 48 g•cm) | ||
|
| ||
| (0.31 - 0.67 oz•inch) | ||
|
| ||
FWD | 0.05 - 0.29 mN•m | ||
| |||
| (0.5 - 3 g•cm) | ||
Back Tension |
| ||
| (0.007 - 0.04 oz•inch) | ||
|
| ||
|
|
| |
FF |
| 4.90 mN•m | |
(more than 50 g•cm) | |||
| |||
| |||
REW |
| (more than 0.69 oz•inch) | |
|
|
|
Tape Tension Measurement
Mode | Torque Meter | Meter Reading |
|
|
|
|
| 4.90 mN•m |
FWD | (more than 50 g) | |
|
| (more than 1.76 oz) |
|
|
|
– 7 –