OPERATION
The source name will appear in the upper line of the
Audio Input Selection
The AVR 247 is programmed at the factory to use the analog audio inputs for each source (except for the DVD, Video 2, HDMI 1 and HDMI 2 sources; see Table 6). To assign a digital audio input to a source (if you have not done so using the Input Setup menu during Initial Setup), press the Digital Button on the remote or front panel. The current audio input selection will flash in the display, and you may press the ⁄ /¤ (or ‹ / › on the front panel) Buttons to scroll through the audio inputs. When the desired input appears, press the Set Button to select it. See Figure 67.
Figure 67 – Digital Input Selection
If the Auto Poll feature is ON in the Input Setup menu, and if a digital audio input has been assigned to the source, the AVR 247 will first check the digital audio input for a signal. If a signal is present, the AVR 247 will select the digital audio input. If no signal is present, the AVR 247 will switch to the analog audio inputs for the source.
Video Input Selection
When a source is selected, the AVR 247 switches to a video input as follows:
The VIDEO IN line of the Input Setup menu indicates which of the video inputs on the AVR 247 is assigned to each source. As shown in Table 5, by default the Component Video 1 input is assigned to the DVD source, the Component Video 2 input is assigned to the Video 1 source, and the Component Video 3 input is assigned to the Video 2 source. The two HDMI inputs obtain the video signal from their own inputs, and may not be reassigned to another video input.
If your iPod is capable of playing still images and videos, it may be used as a video source. However, you may not select another device for viewing while listening to audio files stored on the iPod, nor can you view video or images stored on the iPod while listening to another audio source.
All other sources default to the COMPOSITE setting, meaning that they are using their composite or
NOTES:
•Due to
•
•Due to the design of some video displays, analog 480p or 720p component video source signals may produce artifacts when used with the AVR’s analog video outputs (composite,
•The AVR 247 cannot convert 1080i or 1080p analog video signals to the HDMI format, but passes 1080i signals to the Component Video Outputs. This affects users of Microsoft Xbox 360 systems and some older
The component video inputs may be reassigned to other source inputs as needed, depending on the physical connections you made during the Installation procedure.
If a signal is present at the component video input assigned to that source, it will be selected.
If no signal is present at the component video input, then the
For
6-/8-Channel Direct Inputs
If you wish to hear audio through the
39
