HOME DVD PLAYER | V10M10_IM_EN_12312007 |
CARE AND MAINTENANCE GUIDES
Handling a Disc
•Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with the shiny, unprinted side of the disc.
•Do not attach adhesive tape, stickers etc., to the disc label.
•Clean the disc periodically with soft,
•If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
•When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc. Never wipe in circular motions.
•To remove a disc from its storage case, press down on the centre of the case and lift the disc outs, holding it carefully by the edges.
•Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records. compact disc have no groove to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles.
Cleaning the Unit
•To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
•The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts.
•If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinets.
•If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.
Caution: never allow any water or other liquids to get inside the unit while cleaning.
HOME DVD PLAYER | V10M10_IM_EN_12312007 |
TROUBLESHOOTING GUIDE
No picture or no sound
•Ensure whether the [POWER] button on the front panel is on.
•Ensure whether the power cord is connected properly.
•Ensure the power outlet is working.
Picture but no sound
•Ensure the audio jacks are securely connected.
•Ensure the volume is turned up to the proper level.
•Ensure you have set the AUDIO settings correctly.
•Ensure you have connected the audio cable properly.
•Ensure the audio is not set to mute.
Sound but no picture
•Ensure the video jacks are securely connected.
•Ensure you have connected the video cable properly.
•Ensure you have set the VIDEO settings correctly.
Poor picture or poor sound
•Ensure you have set the AUDIO and VIDEO settings correctly.
•Ensure the disc is not scratched or stained.
The “Bad Disc” indication is displayed.
•Ensure the disc is not warped, damaged or deformed.
•Ensure the disc is not badly stained or damaged.
•Ensure the disc format is compatible with the player.
The remote control isn’t working.
•Make sure the [POWER] button on the main unit is set on.
•Point the remote control directly at the remote control sensor on the main unit.
•Remove any obstacles between the remote control and the remote control sensor.
•Change the remote control batteries.
The “No Disc” indication is displayed.
•Ensure you have loaded a disc.
•Ensure the disc is not upside down.
•Ensure the disc isn’t distorted, stained or scratched.
The main unit is not working.
•Power off the main unit and turn it on again.
20 | www.jWIN.com | 21 | www.jWIN.com |