HOME DVD PLAYER | V10M10_IM_EN_12312007 |
GETTING STARTED
Dolby® Digital Setup Page
DYNAMIC
Select your desired Dynamic Range Compression Rate (DRC) to adjust linear compression results of the signals.
1. Select Dolby and press Navigation button to enter
Dynamic setting mode.
2. Press Navigation
button to highlight |
|
the DRC level indicator, then press Navigation , | buttons to select your DRC rate |
level. |
|
3.Press 
button to confirm your selection. Press SETUP button to exit the Setup menu.
Preference Page
The menu gives you options to change some aspects of the DVD player to fit your preference. To access the Preferences Setup Menu, press the SETUP button while the player is in STOP
mode. Select the Preference Setup using the Navigation button. Press
and select the desired options using Navigation , , , buttons to browse through the menu/submenu and press the button to confirm selection.
AUDIO
Choose to selects the dialogue language: English, French, Spanish, German or Japanese.
SUBTITLE
Choose to select the subtitle language: English French, Spanish, German, Japanese, or Off.
DISC MENU
Choose to select the disc’s menu language: English, French, Spanish, German or Japanese.
Note: Discs are engineered differently. The DVD player cannot override some languages or preferences. If a disc’s software was created to play the movie (title) in a preferred language, the preference you set might be ignored. Also, if the language isn’t available on the disc you’re playing the disc’s default languages will be chosen. If the disc wasn’t created with subtitles, you won’t be able to use the Subtitle feature.
DEFAULT
Select this option to reset all preferences to their original factory settings.
HOME DVD PLAYER | V10M10_IM_EN_12312007 |
OPERATIONAL INSTRUCTIONS
Playback of a DVD
1.Plug the power cord of your DVD player into the outlet once it is connected to your TV.
2.Turn on the TV and tune to its Video input channel, if necessary.
3.Press the STANDBY/STOP button on the DVD player or the STANDBY button on the remote control to turn it on.
4.Press the OPEN/CLOSE button on the front of the player or remote control to open the disc tray.
5.Place a disc gently into the tray with the disc’s label facing up
6.Press OPEN/CLOSE again to close the disc tray. Play starts automatically. If a menu
appears, one of its options can be selected to start playing the disc. Highlight it and
press
.
7.Press STOP to stop playback. The player remembers the point where disc was stopped.
8.If you press PLAY again, playback resumes from this point. To stop playback completely
or to start again from the beginning, press STOP twice.
Note: If the player is left in STOP mode for more than one minute without any user interaction, the screen saver is activated.
9.To switch player to STANDBY mode press and hold the STOP button until the STANDBY indicator appear.
REW / FWD
During playback, press either the REW or FWD button to move the DVD forward or backward at double (2x) speed to locate a specific section. Repeatedly press these buttons and the speed will increase to 4x, 8x, 16x and resume normal playback. The disc will move forward
or backward at high speed until you press the | button; normal playback will resume at that |
point. |
|
PAUSE / STEP
Press the PAUSE/STEP button to pause the picture. Repeatedly press the PAUSE/STEP
button to play the DVD one frame at a time. Press the
button to resume normal playback.
SKIP |
|
Press the Skip | button to advance the disc to the beginning of the next chapter/track. |
Press the Skip | button to move the disc to the beginning of the previous chapter/track. |
ZOOM
Press the ZOOM button once during Normal or Still playback modes, and the unit will zoom 2x. Press once or twice more and the unit will zoom 3x, 4x. Use the Navigation
, , , buttons to move the image on the TV screen. Press the ZOOM button once more to cancel the zoom function. This is not available on all discs.
16 | www.jWIN.com | 17 | www.jWIN.com |