Playing a DVD
1.Press the Open Button to open the DVD/CD Drive.
2.Load a DVD into the DVD/CD Drive of the unit.
The DVD will begin to play automatically. If the DVD does not begin to play automatically, press the Play/Pause Button.
3.Press the Play/Pause Button to play or pause the DVD.
4.Press the Stop Button to stop the DVD during play.
5.Press the Skip Buttons to skip backwards or forwards through the DVD’s chapters. Press and hold the Skip Buttons to search backwards or forwards through a DVD.
6.Press the Volume Buttons to adjust the volume of the unit.
Playing a JPEG Disc
1.Press the Open Button to open the DVD/CD Drive.
2.Load a JPEG disc into the DVD/CD Drive of the unit.
3.Press the Play/Pause Button to play a slideshow or pause the JPEG disc.
4.Press the Stop Button to stop the JPEG disc during a slideshow.
5.Press the Skip Buttons to skip backwards or forwards through the JPEG disc’s images.
Programming a DVD
1.Insert a DVD into the unit. See the “Playing a DVD” operation on page 6.
2.After the DVD is inserted and loaded, press the Program Button on the remote control to display the Program Menu.
3.Use the Directional Buttons to move through the different program slots.
4.Highlight a slot and enter a Title (TT) number and Chapter (CH) number using the Number Keypad on the remote control. Repeat steps 3 and 4 until the desired titles and chapters are programmed.
5.Press the Enter Button to begin playing the programmed titles and chapters.
14 | 15 |