Playing a CD
1.Press the Open Button to open the DVD/CD Drive.
2.Load a CD into the DVD/CD Drive of the unit.
The CD will begin to play automatically. If the CD does not begin to play automatically, press the Play/Pause Button.
3.Press the Play/Pause Button to play or pause the CD.
4.Press the Stop Button to stop the CD during play.
5.Press the Skip Buttons to skip backwards or forwards through the CD’s tracks. Press and hold the Skip Buttons to search backwards or forwards through a CD.
6.Press the Volume Buttons to adjust the volume of the unit.
Programming a CD
1.Insert a CD into the unit. See the “Playing a CD” operation on page 7.
2.After the CD is inserted and loaded, press the Program Button on the remote control to display the Program Menu.
3.Use the Directional Buttons on the remote to move through the twenty different program slots.
4.Highlight a slot and enter CD track numbers using the Number Keypad on the remote control. Repeat steps 3 and 4 until the desired tracks are programmed.
5.Press the Enter Button to begin playing the programmed tracks.
16 | 17 |