Element Electronics PDZ-081E Power Supply Preparation, Using the AC Adapter, Using of Car Adapter

Power Supply Preparation

Using the AC Adapter

The player is supplied with an AC adapter for powering the unit and charging the battery.

1.Connect AC adapter to the left side of the DVD player in the jack marked DC 9.5/12V IN as shown on the right.

2.Plug the two-prong end of the power cord into a grounded electrical outlet. The power indicator lights red.

Note: 1. Turn player's power off before unplugging.

2.In the case of using the adapter, the LCD screen will be brighter than using the rechargeable battery.

Using of Car Adapter

The player is supplied with a Car Adapter for powering the unit and charging the battery in a vehicle.

Connect the car adapter power plug to the unit's power jack and the other end to the vehicle’s 12V accessory/cigarette lighter socket as the right figure.

Attention

¾Do not operate the unit or view video software while driving a vehicle.

¾Place the unit in a proper position for viewing.

¾Detach battery pack when using the AC or car adapter as power source.

¾Disconnect the player from the Car Adapter when starting the vehicle.

14