System Setup
You can change the default settings of this unit to customize its performance to your own preference. Read this section to learn how to set up the system.
Note: the system should better be set up in the state that no disc is in the DVD drive or the unit is on the stop mode.
Follow the steps below to set up your system:
1.Press the SETUP button on the front panel.
2.The setup menu will appear on the screen. It includes General Setup Page, Speaker setup page, Dolby digital setup, Video setup page, Preference page. You can exit the setup menu by pressing the SETUP button again at any time during setting.
3.Press the or (direction buttons) on the remote control or on the front panel to select a
4.Press the or button on the remote control or on the front panel to select the item that you want to set up in the
General Setup Page
The items included in this
1.TV Display
This item is used to set TV display mode.
Press the or button to highlight this item. Press the ENT or button to enter the item.
It includes Normal/PS, Normal/LB and Wide, Wide by default. Press the or button to choose the proper one. Press the ENT button to confirm your selection. Press the direction button to exit from this item.
Note: Select Normal/PS or Normal/LB when a 4:3 TV is connected.
Select Wide when a 16:9 wide screen TV is connected.
25