LS5000DVD_UM.qxp 4/18/05 10:37 Page 5
GENERAL OPERATIONS
Power On/Off
Press and hold the Power / Mode button to turn the unit On or Off.
Auxiliary Input Mode
To access auxiliary devices, press the Power / Mode button momentarily until "AUX IN" appears in the display.
DVD Mode
To play a CD or DVD, press the Power / Mode button momentarily until "DVD ON" appears in the display.
Reset Display
Activate the Reset button with either a ballpoint pen tip or paper clip for the following reasons:
•After initial installation of the unit is completed.
•If the function buttons do not operate.
•Error symbol on the display.
Speaker Switch
•To play the "A" set of speakers, slide the switch to the "A" position.
•To play the "B" set of speakers, slide the switch to the "B" position.
•To play both the "A" and "B" speakers simultaneously, slide the switch to the "BOTH" (center) position.
RADIO OPERATION
Radio Operation
1.Press and hold the Power / Mode button to turn the unit On.
2.Press the Power / Mode button momentarily until the Radio Mode is selected.
3.Press the Band button to select either the AM1, AM2, FM1, FM2 or FM3 radio band.
4.Manually tune in the desired radio station by pressing the Fast Forward / Fast Reverse button and Auto search to the next station by pressing the Skip Up / Skip Down button.
5.Adjust the volume as desired.
FM Stereo Operation
The unit will automatically switch from FM Mono to FM Stereo when the signal strength increases to a stereo level. If the stereo signal should become weak, the unit will switch back to mono. FM Stereo reception is indicated by the word "STEREO" in the display.
Memorizing Radio Stations (Presets)
1.Press the Band button to select either the AM1, AM2, FM1, FM2 or FM3 radio band.
2.Tune in the desired radio station.
3.Press and hold anyone of the six Preset buttons to memo- rize the station until the Preset Number is displayed.
The currently displayed radio station is now memorized. Each band can store up to six preset stations.
STEREOCH
Preset
Number
5