LS5000DVD_UM.qxp 4/18/05 10:37 Page 6
RADIO OPERATION
Automatically Store Stations
Select a Band (if needed). Press and hold the AS/PS button for more than three seconds. The tuner will search for the six strongest stations and store them in memory. The new sta- tions replace stations that were already stored in the current band.
Preset Scan
Select a Band (if needed). Press the AS/PS button. The tuner scans for preset stations stored in the current band and paus- es for five seconds at each station. When a desired station is reached, press the AS/PS button again to stop scanning.
SETTING THE CLOCK
1.Press and hold the Power / Mode button to turn the unit On.
2.Press and hold the Display button. The clock will start flashing, indicating the unit is in the clock setting mode.
3.Within 5 seconds, continuously press the Fast Reverse button until the desired Hour is set. To quickly scroll through the Hours, press and hold the same button. Note the AM or PM indicator in the display.
4.Continuously press the Fast Forward button until the desired Minute is set. To quickly scroll through the Minutes, press and hold the same button.
5.The unit will exit the clock setting mode if either button is not pressed within 5 seconds.
PM
Indicator
Note: To display the clock while in Radio, CD/DVD or AUX mode, press the Display button.
SOUND CONTROLS
Audio Mode Selection
Select the desired audio mode by pressing the SEL button. The modes will be displayed the following order: Volume, Bass, Treble and Balance.
Volume
Increase the volume by pressing the 
button. Decrease the volume by pressing the 
button.
Bass
Press SEL button two times. Increase the Bass by pressing the 
button. Decrease the Bass by pressing the 
button.
Treble
Press SEL button three times. Increase the Treble by pressing the 
button. Decrease the Treble by pressing the 
button.
Balance
Press SEL button four times. Adjust the Balance by pressing either the 
button or the 
button.
R10 = Right speakers only
00 = Equal sound right and left
L10 = Left speakers only
Mute
Press and release the Mute / Loud button once to mute the audio level. "MUTE" will appear in the display.
Loud
Press and hold the Mute / Loud button to enhance the high and low frequency sound quality. "LOUD" will appear in the display.
6