Operations
Using the Video Output
When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Yellow to Yellow)
1.Plug one end of the RCA Video Cable (included) into the Video Output on the unit.
2.Plug the other end of the RCA Video Cable (included) into a video input on a television.
3.Set the television to the appropriate video input.
Video played through the unit will now appear on the connected television.
Playing a DVD or CD
1.Turn the DVD/OFF/RADIO dial to the DVD position.
2.Open the DVD/CD door, and insert the DVD or CD to be played.
3.Press the Play button to begin playing the loaded disc.
Tuning the AM/FM Radio
1.Turn the DVD/OFF/RADIO dial to the Radio position.
2.Turn the AM/FM/FM St. dial to the desired position.
3.Extend and adjust the FM Antenna to improve FM radio reception.
An AM Antenna is built into the unit. To improve AM reception, adjust the position of the unit.
4.Turn the Tuning dial to adjust the AM or FM radio station.
5.Turn the Volume dial to adjust the volume of audio output from the unit.
Programming a CD or DVD
1.Load a CD or DVD into the portable DVD stereo system.
2.Press the Program button on the remote.
3.Use the Number Keypad on the remote to enter a title and chapter for a DVD or a track number for a CD.
4.Enter the titles and chapters, or tracks in the order you want them to play.
5.After the desired titles and chapters, or tracks are programmed, press the Play button to begin playing the programmed list.