Avayon DXP-10P II manual Connecting to a Stereo Component

Connecting to a Stereo Component

By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection.

1.Turn off both DVD player and your stereo system.

2.Connect the SPDIF to your stereo system as illustrated below. 3.Turn on power of DVD player.

Receiver/Amplifier

COAXIAL

Coaxial cable	Coaxial cable
SPDIF(black)	COAXIAL(black)

Depending on your amplifier system, you need to make the following selection from MENU:

1.Refer to "Changing Audio Output" on page 23.

2.Select SPDIF/RAW if your amplifier has 5.1-channel decoder. 3.Select SPDIF/PCM if your amplifier has 2 channels.

4.Select OFF, if there is no digital signal output from the DVD player.

~ 10 ~