Using the Battery Pack
Installing the battery pack | Removing the battery pack |
<1>.Align and insert the battery pack into the corresponding slots on the back of the unit.
<2>.Slide the battery pack to the | <1>.Slide down the latch. <2>.Slide the battery pack to the |
left until it clicks into place. | right, and remove. |
Charging the battery pack
1.Attach the battery pack to the Player.
2.Use the AC adapter to charge the battery pack. Make the connection as illustrated below. 3.Slide POWER to OFF. ( The Player must be turned off to charge the battery).
To DC12V IN on the DVD player
LED Indicator
During charging, the red and green LEDs blink alternatively.
When the battery is fully charged, the orange LED stays lit .
When the Player uses battery for power, steady red LED lights.
If the battery power is low, the red LED blinks.
To home power outlet
LED INDICATOR
OPEN |