FM TRANSMITTER INSTRUCTIONS | ENG 55 |
FM TRANSMITTER
1. Press "ADJUST" button to enter the adjustments of brightness, color, TFT mode, view mode, FM transmitter and IR transmitter.
2.Use the 
/ 
buttons on the main unit board or control to choose FM transmitter, then press 
/ 
buttons on the remote enter button.
| FM |
ON: 8 7.6 MH Z | OFF |
:ENT
FM
FM :87 . 6
0 87. 6 MHZ
:SEL 
:-/+
:ENT
:-/+3.Use the 
/ 
buttons to choose "ON", then press 
enter button to enter frequency input mode.
4.There are two frequency input modes: one is to input numbers directly; the other is to increase or decrease frequencies by the direction buttons. By pressing the
/ 
buttons to change the place number inputted, while the 
/ 
buttons to decrease and increase frequency number.
5.The input frequency range is from
6.If the input number is out of the range of
7.Press ENTER button to save the choice after selecting the preferable frequency within the permissible range. Then the player will transmit audio signal according to this frequency. Choose "OFF" to turn off the FM function.
8.Adjust your receiving set (eg. car stereo) to the corresponding frequency to receive the transmitted audio signal from the player.
9.The transmission range will be within approximately 3 meters.
MOBILE ENTERTAINMENT 
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn