Fit the Portable DVD Player to | ENG 57 |
the Headrest Mount or VESA Wall Mounting Bracket |
|
1. The followings show you how to fit the portable DVD player to the headrest mount in the car.
1). Take out the headrest mount and fix it on the car chair.
Release the straps | Place the two mounting straps over |
| your headrest with the mount's |
| sponge facing the headrest . |
Secure the mount by tightening the straps
2). Take out the backplate and fit it on the rear side of portable DVD player
Fit the screws in the four screw | Screw Size: M4*8 |
holes where the arrow pointed |
|
3). Gently slide the portable DVD player down by aligning the backplate groove with the headrest mount until you hear the click sound. Then the installment is finished.
2. How to fit portable DVD player to the VESA wall mounting bracket
Gasket Size: 4.3*9*0.8mm
Connect the portable DVD player with the VESA wall mounting bracket with the middle four screw holes (there are 4 gaskets for using).
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn