1-1 DVD Playback
Preparation
Connect the portable DVD player with the AC adaptor and/or battery pack, and playback through headphones, speakers, or home theater system.
To connect to home theater or stereo system:
Turn on the TV set, and select “Video” as the TV input.
Turn on the home theater/stereo system and select the input source which you connected the portable DVD player.
Basic Playback
1Slide POWER ON/OFF switch to POWER ON.
2Press <OPEN/PUSH> button to open the disc cover.
3Place Disc in the tray with the printed side up.
Hold the disc without touching the playable surface, position it with the printed title side facing up, align it with the guides, and press the disc firmly onto the center spindle.
4Close the disc cover.
Close the disc cover, the portable DVD player will start playback automatically.
If the disc contains one or more titles, a menu screen will appear on the screen.
<<NOTE: Proceed with steps 5 and 6 when a menu is available on the disc >>
5 Press < / | / | / > to choose the preferred selection. |
6Press 
<ENTER> or 
<PLAY>.
The player will start playback of the selected item.
Stopping Playback and Returning to The Menu Screen (If a Menu Screen Is Available on The Disc)
Press 
<MENU>.
The portable DVD player stops playback, and then displays the menu screen.
After operation
When the portable DVD player is not in use, remove the disc and slide POWER ON/OFF switch to turn off the player. Then close the display panel.
<<NOTE >>
The disc continues to spin while the menu is displayed even after the player has finished playing a
particular disc. When no further selections are to be played, be sure to press the 
<STOP> button to clear the menu screen.
If the disc is placed in upside down (and it is a single sided disc), the player’s display will appear “BAD DISC”.
For your reference:
When 
appears while a button is being operated, it means that the corresponding operation is pro- hibited by the player.
15