12. Rechargeable Battery Installation and Use
Using and Maintaining your Rechargeable Batteries
(1)Please make sure you always use only the AC transformer in- cluded with the DVD player to recharge the player batteries.
(2)Recharge effectiveness will degrade when environmental tempera- tures drop below 10 C or exceed 35 C.
(3)Please remove battery from the player and store properly if the player is not to be used for an extended period of time. For periods of two months or more, please recharge the battery at least once every two months to avoid irreparable damage to the battery. If the battery is
Installing the Battery Pack
1.First make sure the player is in the “ STOP “mode and that the AC power supply has been disconnected.
2.Close the player cover and flip the player over on its backside.
3.Align the battery pack with the player module’s rear edge. Please pay attention to the positioning arrows printed on both the battery pack and player.
4.Click the battery pack into position on the player module. Move the bat- tery pack in the direction indicated by arrow (1) & (2) in the picture below. The pack is in the correct position when you hear a click .
1
2
left attached to the player for an extended period of time, please re- charge the battery at least every two weeks.
(4)Avoid unnecessary recharging fully charged batteries. Remove the battery from the transformer once the indication light has turned green.
(5)When charging the full battery is continued for a period of time, the battery can become overcharged. The temperature of the battery will rise and activate the internal protection circuit, which results in a tem- porary power cut off.
Removing the Battery Pack
1.First make sure the player is in the “ STOP ”mode.
2.Flip the player over on its backside and press the set button in the direction indicated by arrow (1).
3.While holding the button in, slide the battery pack out in the direction indicated .
1
56