1
2
6. Remote Control Buttons
SHIFT +
(Slow Motion)
Press the” SHIFT “key and then the “ 
“ key to switch the player into slow motion mode. Press once for 1/2 speed and twice for 1/4 speed play. This function is valid only for video discs and will not work with audio discs. In slow mode the audio output will be disabled.
To cancel slow play, press the “ 
“key to resume normal speed play.
1 PREV/NEXT Key
Pressing the” 
“or” 
“keys will cause a CD to skip to the song immediately previous or after the current. On a DVD or VCD the player will immediately skip to the following or preceding chapter.
2 MARK Key
The following will appear
This command sets the start position for the memory function. While a disc is in
play, press the “ MARK “key to bring up the above symbol, then use the 
or 
keys to move the cursor over any one of the five positions to the right of the symbol. Press “ ENTER “to confirm.
The current play time will be recorded, up to a maximum of five positions. If you
wish to skip forward to any one of the selected positions, again use the 
or 
keys to make your choice and then press ” PLAY ” to begin playing the selection. Posi- tion memory will be erased automatically when a disc is removed from the player.
Please note that when you are playing a VCD, the play back control function must be switched to off before position memory can be used. Please refer to page 40.
27