CLOCK SETTING (Continued)
Setting the Alarm (s)
i.This Radio allows you to set two different
ii.The procedure for setting the alarm time for ALARM 1 and ALARM 2 are the same.
iii.The following procedure describes how to set ALARM 1 alarm time:
1.In POWER off mode, press the ALARM 1 Button briefly. The ALARM 1 Alarm Indicator 
appears.
2.Press and hold the ALARM 1 Button until the wakeup sound source appears and flashes in the display.
3.Press the : or 9 Buttons repeatedly to select the Alarm1 wakeup mode (HD Radio FM, HD Radio AM, iPod or Buzzer).
HDRadioFM
HDRadio AM
iPod
Buzzer
4.Press the ALARM1 Button to confirm when the desired wakeup mode appears in the Display. The Display will then show the flashing Hour digits prompting for input.
5.Press the : or 9 Buttons to select the desired wakeup Hour.
Note: Make sure the hour is set so that AM or PM is correctly displayed. It is important that the "AM" or "PM" setting is correct for proper operation of the Alarm function.
6.Press the ALARM 1 Button again to confirm the wakeup Hour. Minute digits will appear and flash in the Display.
7.Press the : or 9 Buttons to select the desired Minutes.
8.Press the ALARM 1 Button again to confirm the Minutes. The Alarm sound level will then be displayed and flash to prompt for input.
9.Press the VOLUME + or – Buttons to select the desired wakeup sound level.
10.Press the ALARM 1 Button to confirm and the alarm setting process is then completed.
CLOCK LIGHT OPERATION
1.For a bright LCD Display under normal room illumination, press the SNOOZE/LIGHT Button once. The LCD backlight will turn on.
2.For a dim LCD Display in the dark press the SNOOZE/LIGHT Button again to turn the LCD backlight off.
- 18 -