Jensen JiMS-60 owner manual Specifications, Power Requirement, Frequency Range

		Remove your iPod from the dock and
	iPod is not installed	check for obstruction on the
	properly.	connectors in the dock and on your
		iPod. Then reseat it in the dock.
	iPod is locked up/ frozen.	Please make sure your iPod is working
		properly before docking into the unit.
	iPod battery has problem.	Please refer to your iPod manual for details
		on resetting.
	The reception at the set	Slightly rotate the unit for the best
AM band is too	location is poor.	reception.
noisy.	iPod is docked or near	Remove the iPod from the dock and
	the unit	move it away from the unit.
	Volume level is set too	Decrease the volume.
	high.
		If the iPod original sound source is of
		poor quality, distortion and noise are
		easily noticed with high-power
Sound is		speakers. Try a different audio source
		such as a music CD.
distorted.	Sound source is
	distorted.
		If you are using an external sound source
		like older generation of iPod, try reducing
		the output volume on the device itself. Also
		try turning bass boost OFF or change the
		EQ setting.
Unit gets warm
after extended	This is normal.	Turn the unit off for a period of time or
play at high		lower volume.
volume.

	SPECIFICATIONS
Power Requirement	AC 120V~ 60Hz 10W
Main Unit

Back-up Battery for Clock 1 x DC 9V 006P(6F22) Battery

Frequency Range
Radio	AM 530 - 1710 kHz
	FM 88 - 108 MHz

"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

13