DV2007
8.BASIC OPERATIONS
3)PANEL RELEASE BUTTON (REL)
Press this button to remove the control panel.
1)POWER ON/OFF BUTTON ( 
)
Press POWER/MUTE button or any other button on the front of the radio (except Open/Eject) to turn the unit on. And Long press POWER /MUTEbutton again to turn the unit off.
22)FRONT PANEL A/V IN JACK
The unit is allowed to connect with external Audio / 
Video system such like Digital Camera or DVD
Console. You can connect the external A/V system
thru the A/V in jack on front panel. After connect with 
external A/V system, pressing mode to “A/V In 2” to
enjoy this external A/V system on this unit.
1Left Audio
2Right Audio
3Ground
4 Video
3.5mm A/V Cable ( not included )
1) MUTE BUTTON (MUTE)
Short Press the MUTE button to mute the audio output, and “Mute” will appear on the display. Press the mute button again to restore the audio output to the previous level.
8)SUB-WOOFER (SUB-W)
Press the
10)iX-BASS BUTTON (iX-Bass )
Press the
5) MODE BUTTON (MODE)
Short Press the MODE button to select a different mode of operation as indicated on the display panel. Available modes include Tuner, DVD,AV
18) DISPLAY (D)
Short Press the DISPLAY button repeatedly to select the following different Display options: Spectrum mode 1 > Spectrum mode 2 > Spectrum mode 3 > Default Display.
The selected DISPLAY will appear in the display when the unit is turned on.
Default Display | True Spectrum Analyzer mode 2 |
True Spectrum Analyzer mode1 | True Spectrum Analyzer mode 3 |
The unit is only support the 3.5mm A/V Jack Pin Assignment shown as diagram.
9) LO / DX BUTTON
This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local stations during automatic tuning,press this button until "Local" appears in the display.
6) ENCODER VOLUME BUTTON
To increase the volume, rotate the volume control knob clockwise.
To decrease the volume, rotate the volume control knob counter clockwise.
When the volume is adjusted, the volume level is shown on the display panel as a number ranging from 00 (lowest) to 46 (highest).
RESET
To Reset the Main Unit System
After releasing the front panel, use a pencil or any 
To Reset the DVD Setting
Press SET UP button on remote control or long press AS/PS button to bring up the SET UP Menu, select MISC then select use Default settings, the DVD Setting will resume to factory default value .
7