GETTING STARTED
Getting Started
ADJUSTING THE VOLUME
1Hold down the Volume Set or Monitor but- ton (see page 6); you will hear a continuous tone.
2Turn the On/Off/Volume Control knob to the desired volume level.
3Release the Volume Set or Monitor button.
SELECTING A RADIO CHANNEL
Your radio offers either 4 or 16 channels.
Note: Due to government regulations, some channels may not be programmed. Ask your dealer for more information.
To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel.
14
SENDING A CALL
1Turn your radio on.
2Use the Channel Selector knob to select the desired channel.
3Hold the radio in a vertical
position, press the PTT button, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone.
4Release the PTT button to listen.
RECEIVING A CALL
1Turn your radio on.
2Adjust the radio’s volume (see page 14).
3Switch to the desired channel.
4If at any time a call comes through, you will hear the call at the volume level you have set.
English