Graco ti25442a manual Flushing the Diaphragm Valve

Page 29

Flushing the Diaphragm Valve

This procedure can be performed with the component still mounted in the panel.

If large-grit abrasive or other foreign matter become lodged in the diaphragm valve, it will become necessary to flush the valve. This is a simple procedure; however, it does cause the release of a large volume of air to escape through the released quick coupling. You need to be prepared for the release of air by pulling the quick coupler grommet out of its groove so that it does not get lost.

1.Operate the unit in WASH (see

Using the Wash Feature, page 17) until all abrasive clears from the blast hose.

2.Close the abrasive ball valve, then turn the selector valve to RINSE.

Repair

3.Disconnect the quick coupling at the abrasive ball valve (not at the bottom of the pot).

4.Turn the selector valve to WASH. This will pump water out of the quick coupler and allow you to reach up inside and clear all abrasive and remove the grommet.

5.Make sure nothing is in the path of the open quick coupler, then engage the blast control briefly and several times.

NOTE: High flow air should escape through the cam-lock coupling. If this does not occur, the diaphragm valve is malfunctioning. Replace entire diaphragm canister (EQ5140 – EQ600, EQ5142 – EQ300).

6.Hold the male end of the quick coupler up to the water coming from the cam-lock end of the coupler. Clean off any dirt or abrasive.

7.Turn the selector valve to RINSE to stop the flow of water.

8.Re-insert the grommet into its internal groove inside the cam-lock.

9.Reconnect the quick coupler. If properly cleaned and connected, there should be no leaks at the coupler during operation.

334666B

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents EcoQuip Vapor Abrasive Blast System Important Safety InstructionsRelated Manuals ContentsModels Dust and Debris Hazard Burn Hazard 334666B EQ200T and EQ400T System Component IdentificationKey DataTrak ControlsPressure Relief Procedure Lifting the Trailer Systems Checklist Before StartingOperation Connecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting on Higher Surfaces Blasting TipsGeneral Grit Size Blast PressureWood SteelUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment Problem Cause Solution TroubleshootingSee Refilling the Pot with Abrasive, See Pneumatic Blast Control Circuit If flushing does not solve the problem, see Checking for Leaks Troubleshooting ExamplesPneumatic Blast Control Circuit Repair Repairing the Main Air RegulatorFlushing the Diaphragm Valve Perform the Pressure Relief Procedure, Repairing the Diaphragm ValveCleaning the Auto-Vent Valve Approved Batteries Replacing the DataTrak BatteryReplace Battery Approved Fuses DataTrak Part Replacing the DataTrak FuseReplace Fuse Ref. Part Description EQ200T and EQ400TPart Description Enclosure Enclosure Parts List EQ200 Trailers TrailersEQ4E03 Trailer EQ4E03 Parts List Description EQ4E04 Trailer EQ4E04 Parts List Description Pressure Pot Pressure Pot Parts ListHose Schematic EcoQuip Skid Systems Vapor Abrasive Blast Systems and AccessoriesEcoQuip Trailer Systems Model Series BrakesTrailer Units Mobile/Skid UnitsModel Series Description Model DescriptionModel Description Type Length Blast Control HosesNozzles Model Other AccessoriesCommon Spare Parts Dimensions EQ400T Metric Technical SpecificationsEQ200T Metric 334666B Graco Information Graco Extended Warranty for EcoQuip Components

ti25442a specifications

The Graco TI25442A is a state-of-the-art paint sprayer designed for both professionals and DIY enthusiasts looking to achieve a flawless finish on various projects. This versatile tool is specifically engineered for residential and commercial applications, providing an exceptional solution for painting walls, ceilings, furniture, and more.

One of the standout features of the Graco TI25442A is its powerful airless spraying technology. This ensures a high-pressure output, allowing for a smooth and even application of paint without the need for thinning. The sprayer is capable of handling a variety of coatings, including stains, primers, and latex paints, making it a multifaceted addition to any toolbox.

Another defining characteristic of the TI25442A is its adjustable pressure control. This feature allows users to easily modify the spray pressure to suit different project needs, providing better control and precision. Whether you’re tackling intricate details or larger surfaces, this sprayer is flexible enough to accommodate various painting techniques.

The Graco TI25442A also boasts a durability-focused design. It is built with high-quality materials that enhance its longevity, ensuring that it can withstand the rigors of frequent use. The sprayer is also equipped with a stainless-steel piston pump, which provides superior performance and reliability over time.

Ease of maintenance is another highlight of this model. The sprayer features a user-friendly design, making it simple to clean and maintain after each use. The built-in filter helps prevent clogs, allowing for a hassle-free spraying experience.

Additionally, the TI25442A comes with a robust hose that offers ample length for maneuverability during projects. This feature is particularly beneficial for larger areas, as it reduces the need for constant repositioning of the sprayer.

In conclusion, the Graco TI25442A is a powerful and versatile airless paint sprayer that combines advanced technology with user-friendly features. Its adjustable pressure control, durable construction, and ease of maintenance make it an excellent choice for anyone looking to achieve professional-quality results in their painting projects. This sprayer is a reliable tool that stands out in the competitive market of paint application equipment.
Top Page Image Contents