Graco ti25442a manual 0 0 0 8 8 0 0 0 3

Page 14

Operation

21.Slowly adjust the abrasive meter valve while the abrasive is blasting from the nozzle. Typical adjustment ranges from 1/8 to 1/4 turn open.

NOTE: The DataTrak can be used to assist in setting the pump cycle rate. Optimal abrasive media consumption typically occurs with the cycle rate set at 7–10 cycles per minute.

0 0 0 0 0 8 8 0 0 0 3 8

NOTE: Use a piece of test material similar to what you will be blasting.

NOTE: Always start as gently as possible and then increase the blast force as necessary to clean without doing any damage to the substrate. When properly set, the pump should cycle 7-10 times per minute. High production rate users may need to increase cycle rate above 10 cycles per minute.

NOTE: Close the abrasive ball valve whenever you stop blasting for more than 2-3 minutes. This will help to extend the service life of the diaphragm valve.

334666B

Image 14

Contents Important Safety Instructions EcoQuip Vapor Abrasive Blast SystemRelated Manuals ContentsModels Dust and Debris Hazard Burn Hazard 334666B System Component Identification EQ200T and EQ400TDataTrak Controls KeyPressure Relief Procedure Lifting the Trailer Systems Checklist Before StartingOperation Connecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting Tips Blasting on Higher SurfacesWood Grit Size Blast PressureGeneral SteelUsing the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment Troubleshooting Problem Cause SolutionSee Refilling the Pot with Abrasive, See Pneumatic Blast Control Circuit If flushing does not solve the problem, see Troubleshooting Examples Checking for LeaksPneumatic Blast Control Circuit Repairing the Main Air Regulator RepairFlushing the Diaphragm Valve Repairing the Diaphragm Valve Perform the Pressure Relief Procedure,Cleaning the Auto-Vent Valve Approved Batteries Replacing the DataTrak BatteryReplace Battery Approved Fuses DataTrak Part Replacing the DataTrak FuseReplace Fuse EQ200T and EQ400T Ref. Part DescriptionPart Description Enclosure Enclosure Parts List Trailers EQ200 TrailersEQ4E03 Trailer EQ4E03 Parts List Description EQ4E04 Trailer EQ4E04 Parts List Description Pressure Pot Parts List Pressure PotHose Schematic EcoQuip Trailer Systems Vapor Abrasive Blast Systems and AccessoriesEcoQuip Skid Systems Model Series BrakesModel Series Description Mobile/Skid UnitsTrailer Units Model DescriptionModel Description Type Length Blast Control HosesNozzles Model Other AccessoriesCommon Spare Parts Dimensions EQ400T Metric Technical SpecificationsEQ200T Metric 334666B Graco Extended Warranty for EcoQuip Components Graco Information

ti25442a specifications

The Graco TI25442A is a state-of-the-art paint sprayer designed for both professionals and DIY enthusiasts looking to achieve a flawless finish on various projects. This versatile tool is specifically engineered for residential and commercial applications, providing an exceptional solution for painting walls, ceilings, furniture, and more.

One of the standout features of the Graco TI25442A is its powerful airless spraying technology. This ensures a high-pressure output, allowing for a smooth and even application of paint without the need for thinning. The sprayer is capable of handling a variety of coatings, including stains, primers, and latex paints, making it a multifaceted addition to any toolbox.

Another defining characteristic of the TI25442A is its adjustable pressure control. This feature allows users to easily modify the spray pressure to suit different project needs, providing better control and precision. Whether you’re tackling intricate details or larger surfaces, this sprayer is flexible enough to accommodate various painting techniques.

The Graco TI25442A also boasts a durability-focused design. It is built with high-quality materials that enhance its longevity, ensuring that it can withstand the rigors of frequent use. The sprayer is also equipped with a stainless-steel piston pump, which provides superior performance and reliability over time.

Ease of maintenance is another highlight of this model. The sprayer features a user-friendly design, making it simple to clean and maintain after each use. The built-in filter helps prevent clogs, allowing for a hassle-free spraying experience.

Additionally, the TI25442A comes with a robust hose that offers ample length for maneuverability during projects. This feature is particularly beneficial for larger areas, as it reduces the need for constant repositioning of the sprayer.

In conclusion, the Graco TI25442A is a powerful and versatile airless paint sprayer that combines advanced technology with user-friendly features. Its adjustable pressure control, durable construction, and ease of maintenance make it an excellent choice for anyone looking to achieve professional-quality results in their painting projects. This sprayer is a reliable tool that stands out in the competitive market of paint application equipment.